Dell TL2000 manual Configure Drive, Scsi ID

For Auto Clean to function, the following criteria must be met:

–On 4U libraries with library firmware of .80 or lower that still contain a Dedicated Cleaning Slot (DCS), or 4U libraries with library firmware higher than 1.95 that chose to retain the DCS in their library, a CLN cartridge must be present in that slot.

–On libraries that don’t have a DCS, a storage slot must be reserved (RSVD) by reducing the active slot count by one.

–A cleaning cartridge (CLNxxxLx) must be placed or moved to the reserved slot.

–Auto Clean must be enabled.

Note: Cleaning cartridges must be replaced after 50 cleanings. The Web User Interface inventory screen will show the number of cleaning sessions remaining.

vI/O Station(s) enabled - The I/O Station(s) can be enabled (the default), or disabled so the stations can be utilized as storage slots.

vRemove DCS No - If the DCS has been removed, it cannot be reinstated. This option will no longer appear in the Operator Control Panel.

vHost Label Length - The Host Label Length is related to the Bar Code Labels appearing on the media being used. The default value is 8, but 6 can also be chosen.

Configure: Drive

Configure

Drive

Drive Interface

SAS drives	SCSI ID	A Speed
do not
require user
configuration
		A Type
		A Address
		Mode
		A Loop ID

Control Path

a77ug042

Figure 5-14. Configure: Drive menu

5-22Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide