Dell TL2000 manual Sliding the 2U library into the rack

additional short, counter-sunk screw included in the rack kit. (The 4U rack anchors and mounting brackets are similar.)

7.With library rack anchors and mounting brackets installed, slide the library onto the rails (as shown in Figure 4-12and Figure 4-13). When the library stops, gently push the library to lock the anchors installed on each side of the library to the rails and until the mounting brackets are flush with the vertical rack rails.

a77ug177

Figure 4-12. Sliding the 2U library into the rack

a77ug174

Figure 4-13. Sliding the 4U library into the rack

8.Using a #2 Phillips screwdriver, secure the library to the rack (see Figure 4-14 on page 4-11for a 2U library; see Figure 4-15 on page 4-11for a 4U library) by placing a screw in the center hole of each mounting bracket and tightening

them (

1

).

4-10Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide