Dell TL2000 manual The 2U library Service Library Upgrade Firmware

Each test will show a result of “Passed” or “Failed”. Test results will clear:

vWhen the test is rerun

vWhen the library is rebooted

The time and date of the last test will appear below the Key Path Diagnostics screen. If any of the tests fail, refer to “Maintenance Problems” on page 7-2for additional information.

Service Library: Upgrade Firmware

This page displays the current library and drive firmware versions. Firmware can be downloaded to the host then uploaded to the drive in the library by using this page.

In the first line you can see the actual loaded firmware revision or level installed on the drive. Click Browse... to choose the firmware file you have downloaded from the web site on the first drive you want to update (You can not update 2 drives at the same time). Be sure you choose the correct firmware for your drive type. After pressing the Update button the file will be sent to the drive and the drive will be upgraded.

Note: During the update no host drive action is possible. The drive update takes approximately 5 minutes. The system status panel (in the right of the browser window) will change from ″update″ to ″ready″.

a77ug081

Figure 5-54. The 2U library Service Library: Upgrade Firmware page

5-54Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide