Logging out of the Web User Interface

a77ug065

Figure 4-32. The Configure Library: Event Notification screen

2.If you would like to be notified when an error occurs, select Notify Errors.

3.If you would like to be notified when a warning occurs, select Notify Warnings.

4.In To Email Address, enter the email address to which the information will be sent.

5.In Email Domain, enter the domain name for the email address.

6.In SMTP Server Address, enter the IP Address of the SMTP server associated with the email address.

Running Key Path Diagnostic for Testing Encryption

Configuration

Please refer to http://support.dell.com to determine the availability of this feature.

If you have purchased an encryption activation key and any drives in your library are configured for library managed encryption, run the Key Path Diagnostic to ensure that your encryption configuration is correct.

Important: Ensure that library firmware and drive firmware are up to date before running the Key Path Diagnostic. Library firmware level must be greater than 6.xx. See “Verifying/Updating Firmware” on page 4-17.

For information on running the diagnostic, refer to “Service Library: Perform Key Path Diagnostics” on page 5-53.

Restoring Factory Default Settings using the Web User Interface

If you would like to erase your current configuration and restore factory default settings (see Table 5-3 in “Configure: Restore Defaults” on page 5-24),do so by selecting Restore Defaults in the Configure Library menu.

This function is also available on the Operator Control Panel. If you do not have the capability of accessing your library using the Web User Interface, write down all library configuration settings on the Appendix F, “Library Configuration Form,” on page F-1for future reference.