Dell TL2000 manual Configure Library Network, The Configure Library Drive page for a 4U library

Table 5-11. Drive Identity page elements (continued)

Menu Item	Description		2U Library			4U Library
		SCSI		Fibre	SAS	SCSI	Fibre	SAS
Speed	For each Fibre Channel drive, click on the drop			X			X
	down list and select Automatic, 1Gb/s, 2Gb/s, or
	4 Gb/s. Selecting Automatic will allow library
	speed to automatically negotiate to the current
	server speed.
Port Type	For each Fibre Channel drive, click LN-Port,			X			X
	L-Port, or N-Port.
Loop ID	This is the loop position number if the drive is in			X			X
	an arbitrated loop configuration.
Port B Configuration:
	Port B is supported for SAS full height drives				X			X
	only.
	Note: Port B is only supported for failover.

a77ug095

Figure 5-37. The Configure Library: Drive page for a 4U library

Note: When configuration changes of a disabled drive are made from the Operator Control Panel (OCP), the drive powers ON after committing changes. When configuration changes of a disabled drive are made from the Web Interface (RMU), the drive does not power ON after committing changes.

Configure Library: Network

This page shows the current network configuration of the library and allows modification to the configuration. When a change is requested, a pop-up box will ask to confirm the changes.

1.Click Network in the left navigation pane, to display the Network page.

5-44Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide