Dell TL2000 manual Entering Library Network Settings, Enter IPv4 settings if applicable

Entering Library Network Settings

This page shows the current network configuration of the library and allows modification to the configuration. When a change is requested, a pop-up box will ask to confirm the changes.

1.Click Network in the left navigation pane, to display the Network page.

a77ug074

Figure 4-27. Configure Library: Network page

2.Select a Protocol Stack - Choose IPv4 only, IPv6 only, or Dual Stack IPv4 & IPv6.

Note: When changes are made, the following Warning message will appear when the Submit button is clicked.

a77ug171

Figure 4-28. Warning screen

The library must be rebooted or the changes will not take place.

3.Enter IPv4 settings (if applicable).

4-24Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide