Dell TL2000 manual

13d	Library Pick	W	There is a potential problem with the cartridge loader picking a cartridge
	Retry		from a drive or slot.
			v No action needs to be taken at this time.
			v If the problem persists,
			This flag is cleared when the next move command is received.
14d	Library Place	W	There is a potential problem with the cartridge loader placing a cartridge
	Retry		into a slot.
			v No action needs to be taken at this time.
			v If the problem persists,
			This flag is cleared when the next move command is received.
15d	Drive Load	W	There is a potential problem with the cartridge loader or drive when
	Retry		placing a cartridge into a drive.
			v No action needs to be taken at this time.
			v If the problem persists,
			This flag is cleared when the next move command is received.
17d	Library I/O	C	There is a mechanical problem with the library media I/O Station.
	Station
18d	Media	C	It is set when a magazine is removed from the changer.
	Changer
19d	Library	W	Library security has been compromised. The door was opened then
	Security		closed during operation.
21d	Media	I	It is set when the changer is set offline.
	Changer
24d	Library	C	The library has detected an inconsistency in its inventory.
	Inventory		v Redo the library inventory to correct inconsistency.
			v Restart the operation.
			Check the applications users manual or the hardware users manual for
			specific instructions on redoing the library inventory.
25d	Media	W	It is set when it receives unsupported SCSI opcodes.
	Changer
27d	Cooling FAN	W	One or more fans inside the library have failed. This flag is cleared when
	Failure		all fans are working again.
32d	Unreadable	I	The library was unable to read the barcode on a cartridge.
	Bar Code
	Labels

v D = Decimal

v I = Informational suggestion to user

v W = Warning. Remedial action is advised. Performance of data may be at risk. v C = Critical immediate remedial action is required.

B-2Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide