2. CONTROLS, INDICATORS AND CONNECTORS
2-10 Indications in Viewfinder (Cont'd)
Alarm Message Display
ACCU - FOCUS
G
F
| Alarm message display 1 |
|
| Alarm message display 2 | I |
|
| |
|
| B |
| CH1 - - - - - + - - |
|
F 5 . 6 | CH2 - - - - - + - - |
|
STBY | < 6 0 | 1 2 . 4V |
The following alarm messages are displayed on the status 0 and status 1 screens.
Event display is not made when an alarm message is displayed in alarm message display 2.
| Indication | Contents |
|
|
|
| CLOSE CASSETTE COVER | The cassette cover is not closed. |
| VTR WARNING [HEAD] | Head clogging |
1 | VTR WARNING [SERVO] | Servo error |
VTR WARNING [DEW] | Condensation | |
| VTR WARNING [HARD] | Hardware error |
| VTR WARNING [STOP] | Operation stopped |
| VTR WARNING [REW] | Rewinding abnormality |
|
|
|
| TAPE NEAR END | Remaining tape time is less than about 2 minutes in the record mode |
| TAPE END | Tape end reached |
2 |
| REC INHIBITAn unrecordable videocassette (the switch on the back of the cassette is |
|
| set to SAVE) is inserted. |
| NO TAPE | VTR trigger is pressed with no tape loaded. |
|
|
|
Time/Date Display
Time/date display
2 0 0 0 / 0 6 / 1 5 |
| ACCU - FOCUS | ||
2 0 :15:15 |
|
|
|
|
|
|
|
| G |
|
|
|
| F |
|
|
|
| I |
REC2 |
|
|
| SD |
CH1 - - - - - + - - | B | |||
EXT | C : 12 3 | |||
F 5 . 6 | CH2 - - - - - + - - | |||
STBY | > | 6 0 | 1 2 . 4V | |
When setting DISPLAY item of the TIME DATE menu screen to ON, the time and date will appear as shown in the diagram on the left. The time and date are recorded on tape during recording as well.
For the display formats of the time and date, ☞ see page 84. For setting the time and date, see page 43.
30
