JVC GY-DV550U instruction manual Setup Screen

12. SETUP MENU

12-10 SETUP Screen

Item		Function, Operation	Variation Range	Initial Setting
26 PIN OUT	Other than composite signals, another type of video signals can be		Y/C	CPN
	outputted from the VTR/RM multi-pin connector. The other output video		RGB
	signal is selected here.		CPN
	Y/C	: Outputs Y/C separate signals.
	RGB : Outputs RGB signals.
	CPN : Outputs component video signals.
CHARACTER	For selecting whether to mix characters in the MONITOR OUT video.		OFF	OFF
MIX	OFF	: No characters are displayed	ON
	ON	: Character-mixed display
SET UP	For selecting whether to include setup signals in the camera images,		OFF	ON
	external input video or VCR playback video signals.		ON
	OFF	: Setup signals are not included.
	ON	: Setup signals are included. (Setup level: 7.5%)
H PHASE	For adjusting the horizontal phase of the unit in relation to the signal		0	128
	(external sync signal) input through the GENLOCK/AUX IN connector on		to
	the left side of the unit.		255
	Delaying the horizontal phase of the unit in relation to the external sync
	signal .
	................... Increase the number
	Speeding up the horizontal phase of the unit in relation to the external
	sync signal .
	................... Decrease the number
	∗ Adjustment is not possible if the external sync signal is not input. Possible
	values are indicated by - - -.
SC COARSE	For roughly adjusting the unit’s sub-carrier (SC) phase against signals		0	0
	(external synchronous signals) inputted to the GENLOCK/AUX IN terminal		90
	on the left side of the unit.		180
	(0°, 90°, 180°, 270°)		270
	∗ Adjustment is not possible if the external sync signal is not input. Possible
	values are indicated by - - -.
SC FINE	For fine adjusting the sub-carrier (SC) of the unit in relation to the signal		0	128
	(external sync signal) input through the GENLOCK/AUX IN connector on		to
	the left side of the unit.		255
	Rotating the sub-carrier clockwise in relation to the external sync signal
	................... Increase the number
	Rotating the sub-carrier anticlockwise in relation to the external sync signal
	................... Decrease the number
	∗ Adjustment is not possible if the external sync signal is not input. Possible
	values are indicated by - - -.
PAGE BACK	The CAMERA MENU returns when the SHUTTER dial is pressed with		–	–
	the cursor at this position.

83