JVC GY-DV550U Monitoring Audio during Recording, Alarm Monitor, Control, Monitor Select switch

6. SETTING AND ADJUSTMENTS BEFORE SHOOTING

6-11 Monitoring Audio during Recording

	FILTER			ALARM
1	3200k
2	5600k+1/8ND
3	5600k+1/64ND
SHUTTER STATUS				MONITOR
	MENU
AUTO IRIS		FULL AUTO BLACK		LOLUX
	BACK L			STRETCH
	NORMAL			NORMAL
	SPOT L			COMPRESS
	NG		OPERATE
			ON	OFF
ALARM	MONITOR
control	control

OPERATE/WARNING
			LIGHT
RESET			ON
			OFF
MONITOR			COUNTER
SELECT
CH-1			CTL
MIX			TC
CH-2			UB
CH-1	CH-2	CH-1	CH-2
	AUTO		FRONT
	MANUAL		REAR
AUDIO SELECT		AUDIO INPUT
CH-1 AUDIO CH-2
LEVEL

MONITOR SELECT switch

MODE

RM

VTR

INCOM

MIC

CARBON

DYNAMIC

INCOM

MIC LEVEL

ON

OFF

CALL

RM OFF DC IN /BATT.

POWER

EARPHONE jack

Monitoring loudspeaker

The audio input during recording, in record-pause or stop mode can be monitored through the monitoring loudspeaker or earphone.

•The monitoring audio is not output from the loudspeaker while the EARPHONE jack is in use.

•Select the audio channel to be monitored using the MONITOR SELECT switch.

CH-1 : The sound input to the CH-1 channel is output.

MIX : The sound input to the CH1 and CH2 channels is output mixed.

CH-2 : The sound input to the CH-2 channel is output.

•The MONITOR volume control adjusts the monitoring volume.

•The loudspeaker or earphone outputs an alarm tone in the case of an abnormal condition occurring in the unit.

An alarm tone is also output when the tape end is reached or when the battery is running down. The alarm tone volume can be adjusted with the ALARM control. For details on the alarm tone, see page 97.

*Do not increase the audio monitoring volume excessively; otherwise howling with the camera microphone may occur.

52