JVC GY-DV550U instruction manual Connecting a PC, Monitor Audio, Out, Video

11. USING EXTERNAL COMPONENTS

11-2 Connecting a PC

PUSH

DV CAMCORDER

VTR/RM

GY-DV550

PROMPTER		GENLOCK/AUX IN		RS-232C
OUTPUT
Y/C OUT MONITOR OUT	LINE OUT	VIDEO OUT
	CH-1 CH-2
		REMOTE
			AUDIO IN	PC
TC IN	TC OUT		FRONT
			LENS
			TTL RS-232C
DV connector		REMOTE connector converter cable		RS-232C
MONITOR	AUDIO IN		(Optional VC-P893) AUDIO OUT
OUT
connector				VIDEO IN

Non-linear editing controller

DV connector

Perform the following settings when connecting the unit to a Non-linear editing controller, etc.

Connections

Connect the GY-DV550’s VTR REMOTE connector to the RS-232C connector on the PC or the non-linear editing controller using the TTL ⇔ RS-232C converter cable.

Or connect the GY-DV550’s DV connector and the DV connector of the non-linear editing controller using a DV cable.

For compatible non-linear editing controller, consult with your JVC dealer.

Settings

•To remote control the PC or non-linear editing controller by means of RS-232C, set the VCR Setup Menu item No. 050 REMOTE SELECT to "IEEE1394+RS232C". ☞ See page 74.

•To remote control the GY-DV550’s VCR using the DV connector’s IEEE1394 option, set the VCR Setup Menu item No. 050 REMOTE SELECT to “IEEE1394”. ☞ See page 74.

Note:

•When a cable is connected to the REMOTE connector, the VTR Setup Menu is not displayed in the viewfinder. Make settings on the VTR Setup Menu while the cable is not connected.

•When a cable is connected to the REMOTE connector, the VCR operation mode will not be displayed correctly on the Status 1 screen in the viewfinder.

The S.S.F. data stored in the memory of the unit or at the beginning of the tape can be output through the REMOTE terminal.

☞ See page 69.

71