JVC GY-DV550U instruction manual Using AN ANTON-BAUER Battery Pack, Attaching the Battery Pack

4. POWER SUPPLY

4-2 Battery Pack Operation (Cont'd)

USING AN ANTON-BAUER BATTERY PACK

To use an Anton-Bauer battery pack (Propack 13/14, Trimpack 13/14, Magnum 13/14, Compack 13/14 Series), it is necessary to detach the battery case from the GY-DV550 and replace it with the Anton-Bauer battery holder. Use the following battery holder.

•Battery holder: Anton-Bauer QRQ27

Detaching the Battery Case From the GY-DV550 and Attaching The Anton-Bauer Battery

2.

1. Black screw A

1. Remove the two black screws A on the battery case.

2. Remove the lower half of the battery case cover in the downward direction.

3. Mount screw B 3. Connector

3. Mount screw

B

3. To remove the battery case, remove the four screws Bfixing the battery case and the connector connecting the battery case to this unit.

Connector

Compartment

5.

5.4.

Anton-Bauer

Battery holder

4. Connect the connectors protruding from the GY-DV550 with the connectors on the battery holder.

*Following connection of the connectors, insert them into the connector compartment.

5.Secure the battery holder to the GY-DV550 with the four mount screws provided with the battery holder.

*Take care not to pinch the wires. This could result in damage.

Attaching and Detaching an Anton-Bauer Battery Pack

	Guide pins
	Cassette cover
	side panel	Battery
	Guide holes	pack
Release	(x3)	(Trimpack)
lever

Release lever

LIGHT		MODE
ON
OFF		RM
		VTR
COUNTER		INCOM
CTL		MIC
TC	CARBON
UB	DYNAMIC
	INCOM
	MIC	LEVEL
	ON
CH-1CH-2
FRONT
REAR
AUDIO INPUT	OFF
Side panel	CALL
	RM	OFF	/BATT.
			DC IN
with display		POWER

Battery

Attaching the Battery Pack

1. Align the 3 guide pins of the battery pack with the guide holes on the battery holder, and push straight to insert the battery pack.

The battery cannot be attached properly if the guide pins are not inserted straight.

2. Slide the battery pack toward the side panel where the cassette cover is located until it clicks. Now the battery pack has been attached.

Detaching the Battery Pack

While pushing and holding the release lever, slide the battery pack toward the side panel where the LCD display is located, then pull the battery pack outward to remove.

39