10. S.S.F. (Super Scene Finder) FUNCTION
10-2 How to Use the S.S.F. Function
VF
PUSH
OFF ZEBRA
ON | SKIN | AUTO |
AREA | WHITE | |
|
| ACCU |
|
| FOCUS |
| VTR AUDIO | TAKE |
| LEVEL | |
TAKE button
CUE Mode | VTR trigger button |
|
1. Set the S.S.F. mode as CUE mode.
Set the VCR Setup Menu item No. 398 S.S.F. MODE to "CUE".
☞See page 75.
•The CUE mode is indicated in the lower part of the Status 1 screen in the viewfinder.
MARK Mode
1. Set the S.S.F. mode as MARK mode.
Set the VCR Setup Menu item No. 398 S.S.F. MODE to "MARK".
☞See page 75.
•The MARK mode is indicated in the lower part of the Status 1 screen in the viewfinder.
ACCU - FOCUS
|
|
|
| G | ||
|
|
|
| F | ||
|
|
|
| I | ||
|
|
|
| SD | ||
|
|
|
| B | ||
| - | - |
|
|
|
|
F 5 . 6 | - | - - - - | C : 09 9 | |||
STBY |
| < 6 0 | 1 2 . 4V | |||
CUE mode
Number of memorized scenes
*This indicator is not indicating the number of the CUE point.
ACCU - FOCUS
|
|
|
| G | ||
|
|
|
| F | ||
|
|
|
| I | ||
|
|
|
| SD | ||
|
|
|
| B | ||
| - | - |
|
|
|
|
F 5 . 6 | - | - - - - | M : 09 9 | |||
STBY |
| < 6 0 | 1 2 . 4V | |||
MARK mode Number of memorized scenes
2. Press the VTR trigger button to start the recording.
3. When you reach the point that you want to memorize as the CUE point, press the TAKE button.
•The time code data of the point where the TAKE button is pressed is stored in the unit's memory as CUE data. The LOG button’s LED lights during memorization of the
CUE point and the “∗” mark is shown in the viewfinder.
Press the TAKE button each time you reach a point that you want to memorize as CUE data.
4.Stop the recording.
Press the VTR trigger button.
Note:
2. Press the VTR trigger button to start the recording.
3. When you reach the scene that you want to memorize, press the TAKE button.
•The time code data of the point where the TAKE button is pressed is stored in the unit's memory as the start point of the scene.
4.When you reach the scene that you want to memorize as the ending point, press the TAKE button again.
•The time code data of the point where the TAKE button is pressed is stored in the unit's memory as the ending point of the scene.
•The LOG button’s LED lights during memorization of the IN point and the “∗” mark is shown in the viewfinder.
The LOG button’s LED remains off during memorization of the OUT point and the “∗” mark is not shown in the
viewfinder.
For each scene that you want to memorize, repeat steps 3. and 4.
5.Stop the recording.
Press the VTR trigger button.
•Once a tape with recorded S.S.F. data is rewound but not ejected before playback or recording is performed on it again, the previous S.S.F. data cannot be automatically erased when S.S.F. data are recorded (when you overwrite the previous image). Therefore, the S.S.F. data of the overlapped sections will not correspond to the video image.
Furthermore, please note that the time code data may differ from the actual data if recording is started in the CUE mode in this situation.
67
