12. SETUP MENU
12-5 OPERATION Screen
Item |
|
|
|
| Function, Operation | Variation Range | Initial Setting |
|
|
|
|
|
| ||
ASPECT RATIO | Sets the image size of the video signal. | LETTER | 4:3 | ||||
| LETTER | ...... | LETTER BOX (16:9 aspect ratio) image output. | 4:3 |
| ||
| 4:3 |
|
| 4:3 aspect ratio image output. |
|
| |
|
|
|
|
|
|
| |
|
| Note: |
|
|
| ||
| When setting ASPECT RATIO to LETTER, 16:9 screen detection ID |
|
| ||||
| signal will not be outputted from the Y/C OUT connector. |
|
| ||||
|
|
|
|
|
| ||
SHUTTER | The SHUTTER button on the right side section is used to select STEP for | STEP | STEP | ||||
| fixed shutter speed or V.SCAN variable scanning rate for shooting computer | VARIABLE |
| ||||
| monitor screens. |
|
| ||||
| STEP |
| Enables setting of different fixed shutter speeds. [1/100, |
|
| ||
|
|
|
|
| 1/250, 1/500, 1/1000, 1/2000] |
|
|
| VARIABLE | ....... Selected when shooting computer monitor screens, etc. |
|
| |||
|
|
|
|
| [Variable range: 60.1 to 2084.6 Hz] |
|
|
|
|
|
|
|
| ||
FAW | Selects the W.BAL switch (@ on page 13) position to which the FAW (Full- | NONE | NONE | ||||
| Time Auto White Balance Adjustment) function is to be assigned. | A |
| ||||
| NONE |
| FAW function is not used. | B |
| ||
| A |
| FAW is assigned to the A position. | PRESET |
| ||
| B |
| FAW is assigned to the B position. |
|
| ||
| PRESET | ......... | FAW is assigned to the PRESET position. |
|
| ||
|
|
|
|
|
| ||
GAIN L | Selects the gain value in each position of the GAIN switch (9 on page | L: 0dB | |||||
GAIN M | 13). |
|
|
|
| 0dB | M: 9dB |
GAIN H |
|
|
|
|
| 3dB | H: 18dB |
|
|
|
|
|
| 6dB |
|
|
|
|
|
|
| 9dB |
|
|
|
|
|
|
| 12dB |
|
|
|
|
|
|
| 18dB |
|
|
|
|
|
|
| ALC |
|
|
|
|
|
|
| ||
SMOOTH | Smoothens the transition when the GAIN switch (9 on page 13), or | ON | OFF | ||||
TRANS | WHT.BAL switch (@ on page 13) is switched over and achieves gradual | OFF |
| ||||
| change in place of sudden change. |
|
| ||||
| However, the smooth transition function does not function when switching |
|
| ||||
| the GAIN switch set in ALC, FAS button and the LOLUX button. |
|
| ||||
| ON |
| Activates the smooth transition function. |
|
| ||
| OFF |
| Deactivates the smooth transition function. |
|
| ||
|
|
|
|
|
| ||
SPOT L/ | Sets the level of auto iris when setting the AUTO IRIS switch to BACK L or | LOW | MIDDLE | ||||
BACK L | SPOT L. |
|
|
| MIDDLE |
| |
| LOW | : Lowers the iris level. | HIGH |
| |||
| MIDDLE : Opens/Closes the iris by 1 step from the standard state. |
|
| ||||
| HIGH | : Raises the iris level. |
|
| |||
|
|
|
|
|
| ||
PAGE BACK | The CAMERA MENU returns when the SHUTTER dial is pressed with | – | – | ||||
| the cursor at this position. |
|
| ||||
|
|
|
|
|
|
|
|
79
