JVC GY-DV550U instruction manual Process Screen

12. SETUP MENU

12-6 PROCESS Screen

Item	Function, Operation	Variation Range		Initial Setting
MASTER	Adjusts the pedestal level (master black), which is the reference of black.	MAX (100)		NORMAL
BLACK	• To increase the pedestal level ...... Increase the number. (UP)	99	201
	• To decrease the pedestal level .... Decrease the number. (DOWN)		gradations

to NORMAL (0)

to -99

MIN (-100)

DETAIL	Adjusts the detail enhancement level.		MAX (7)		NORMAL
	• To sharpen details	Increase the number. (UP)	6	15
	• To soften details	Decrease the number. (DOWN)		gradations

to NORMAL (0)

to

-6

MIN (-7)

DTL. V/H	Sets the direction, horizontal (H) or vertical (V), in which stronger detail				H-MAX (4)		NORMAL
BAL	enhancement is applied.				3	9
	To strengthen the H enhancement			Increase the number (UP).	gradations
	To strengthen the V enhancement			Decrease the number (DOWN).	to
					NORMAL (0)
		Note:
					to
	While the LOLUX function is operating, the setting value is fixed at
					-3
	NORMAL and “FIX” is displayed.
					H-MIN (-4)
DTL.	Varies the detail enhancement level by changing the detail enhancement				HIGH		LOW
FREQUENCY	frequency. Set in accordance with the subject				MIDDLE
	HIGH		Applies strong detail enhancement.		LOW
			Used to shoot subjects with fine patterns.
	MIDDLE		........ Applies medium detail enhancement.
	LOW		Applies weak detail enhancement.
			Used to shoot subjects with large patterns.
		Note:
	While the LOLUX function is operating, the setting value is fixed at
	MIDDLE and “FIX” is displayed.
SKIN DTL	Sets the Skin Detail function to ON or OFF.				ON		OFF
DETECT	ON		Skin Detail function activated.		OFF
	OFF		Skin Detail function not activated.

☞See "Using the Skin Detail Function" on page 91.

V.	Increases the vertical resolution.	NORMAL	NORMAL
RESOLUTION	• NORMAL .... Vertical resolution 380 lines.	V.MAX
	• V.MAX ......... Vertical resolution 450 lines
	(The sensitivity is degraded and the bright sections may be colored
	depending on the subject.)
KNEE	Sets the knee point (brightness level) when the AUTO KNEE function is	80%	100%
POINT	set to OFF.	85%
		90%
		95%
		100%
ADVANCED	Displays the ADVANCED PROCESS Screen.
PROCESS	☞ See "ADVANCED PROCESS Screen" on page 81.
PAGE BACK	The CAMERA MENU returns when the SHUTTER dial is pressed with	–	–
	the cursor at this position.

80