![](/images/new-backgrounds/1140864/140864119x1.webp)
8. PLAYBACK MODE
8-1 Playback Procedure
2.
OPERATE/WARNING
LIGHT
MODE
|
|
|
| RESET | ON | RM |
|
|
|
|
|
| OFF | VTR |
|
|
|
|
| MONITOR | COUNTER | INCOM | |
FILTER |
|
|
| SELECT | MIC | ||
|
| ALARM | CTL | CARBON |
| ||
1 3200k |
|
| MIX | TC | DYNAMIC |
| |
2 5600k+1/8ND |
|
|
| UB |
|
| |
3 5600k+1/64ND |
|
|
|
|
|
| |
|
|
|
|
|
| INCOM |
|
SHUTTER STATUS |
| MONITOR |
|
| MIC | LEVEL | |
|
|
| ON | ||||
MENU |
|
|
| AUTO | FRONT |
|
|
|
|
| MANUAL | REAR |
|
| |
|
|
|
| AUDIO SELECT | AUDIO INPUT | OFF |
|
|
|
|
|
| CALL |
| |
|
|
|
| LEVEL |
|
| |
AUTO IRIS | FULL AUTO | BLACK | LOLUX |
|
|
|
|
BACK L |
|
| STRETCH |
|
| RM OFF | DC IN |
NORMAL |
|
| NORMAL |
|
| ||
SPOT L |
|
| COMPRESS |
|
|
| /BATT. |
POWER
NG OPERATE
ONOFF
2. EJECT button
EJECT
LOG | REW STOP | FF | PLAY STILL |
|
| 1. POWER switch |
1. OPERATE switch |
Operation
6. STOP button
CAUTION:
4. STILL button
3. PLAY button
5.
1. Set the POWER switch to DC IN/BATT. and set the OPERATE switch to ON.
2. Load the recorded videocassette correctly.
•Slide the EJECT switch to the side. When the cassette cover opens, insert the videocassette and then close the cassette cover again.
When a recordable videocassette (with the switch on the back of the cassette set to REC) is loaded, the unit enters the
In this case, press the STOP button to release the record- pause mode.
3.Press the PLAY button.
a The PLAY indicator lights and playback starts.
4.Press the STILL button to stop playback temporarily.
a The STILL indicator lights and the unit enters the still mode.
•When the still picture mode or stop mode has continued for about 30 minutes, the unit automatically switches to the save mode to protect the tape.
The time until the tape protect mode is initiated can be set to 3 or 30 minutes with the VCR Setup Menu item No. 307 LONG PAUSE TIME.
When used in a cold environment, the setting will be 3 minutes regardless of the setting on the VCR Setup Menu.
•Noise may appear in the picture during still mode.
•When the automatic tracking function is activated at the start of the playback mode, digital noise may appear on the playback image.
•This unit does not allow manual tracking adjustment.
•When playing back a tape recorded on another unit, digital noise may appear during playback.
•When turning on the power with the tape inserted or after loading a tape, the
5. To
aThe STILL indicator goes out and playback starts again.
6.To stop playback, press the STOP button.
aThe PLAY indicator goes out and the unit enters the stop mode.
Memo:
•If a tape recorded in the LETTER mode is played back on a 4:3 aspect ratio monitor TV. Images will be displayed in the letter box (16:9 aspect ratio) that is split horizontally.
Playback of tape recorded in LETTER mode
4:3 aspect ratio monitor 16:9 aspect ratio monitor
•When playing back tape recorded in the LETTER or WIDE mode, 16:9 screen detection ID signal will not be outputted from the Y/C OUT connector.
•ID signal is also not outputted when inputting WIDE signals via the DV connector (IEEE1394 signals).
60