JVC GY-DV550U Audio Input Signal Selection,
Selecting the CH-1 channel input sound

6. SETTING AND ADJUSTMENTS BEFORE SHOOTING

6-9 Audio Input Signal Selection

VF

PUSH	SKIN	AUTO
	OFF ZEBRA
ON	AREA	WHITE
		ACCU
		FOCUS
	VTR AUDIO	TAKE
	LEVEL CH-1

AUDIO IN FRONT connector

OPERATE/WARNING

LIGHT

MODE

		RESET		ON		RM
				OFF		VTR
		MONITOR		COUNTER		INCOM
FILTER		SELECT				MIC
	ALARM	CH-1		CTL	CARBON
1 3200k		MIX		TC	DYNAMIC
2 5600k+1/8ND		CH-2		UB
3 5600k+1/64ND
					INCOM
SHUTTER STATUS	MONITOR				MIC	LEVEL
					ON
			CH-1CH-2	CH-1CH-2			AUDIO IN				AUDIO IN
MENU		CH-1 AUDIO CH-2	AUTO	FRONT
			MANUAL	REAR
			AUDIO SELECT	AUDIO INPUT	OFF
		LEVEL			CALL		REAR				FRONT
SPOT L	COMPRESS					/BATT.
AUTO IRIS FULL AUTO BLACK	LOLUX
BACK L	STRETCH				RM	OFF DC IN
NORMAL	NORMAL
						POWER	LINE/MIC				LINE/MIC
ON	OFF						switch	EARPHONE	FRONT	DC INPUT	switch
								DV LINE MIC	LINE MIC	INTERCOM
NG OPERATE								+48V	+48V
								ON	ON
									AUDIO IN
								DC	REAR
								OUTPUT
	CH-1 AUDIO			CH-2 AUDIO				AUDIO
	INPUT switch			INPUT switch				IN REAR
								connector
	CH-1	CH-2	CH-1	CH-2
		AUTO	FRONT
		MANUAL	REAR
	AUDIO SELECT		AUDIO INPUT

CH-1 AUDIO CH-2

LEVEL

The GY-DV550 is provided with the AUDIO INPUT connector on the front section and the AUDIO INPUT connectors at the rear section for audio input.

Two channels of sound can be recorded on the tape in digital PCM format.

Using the AUDIO INPUT switch, select for each channel (CH1 and CH2) whether the sound to be recorded should be the sound from the AUDIO INPUT connector on the front section or the sound from the AUDIO INPUT connectors on the rear section.

Selecting the CH-1 channel input sound

Make the selection using the CH-1 AUDIO INPUT switch. FRONT : The sound from the AUDIO INPUT connector on the front section is recorded on the CH-1 channel.

REAR : The sound from the AUDIO INPUT connector on the rear section is recorded on the CH-1 channel.

Selecting the CH-2 channel input sound

Make the selection using the CH-2 AUDIO INPUT switch. FRONT : The sound from the AUDIO INPUT connector on the front section is recorded on the CH-2 channel.

REAR : The sound from the AUDIO INPUT connector on the rear section is recorded on the CH-2 channel.

Selection of front audio input and rear audio input connectors

Select the audio signal input to the AUDIO IN FRONT and AUDIO IN REAR connector using the [LINE/MIC] switch. Make settings for the AUDIO IN FRONT and AUDIO IN REAR connectors separately.

LINE : Set to this position when connected to audio equipment, etc.

The reference input level is +4 dBs.

MIC : Set to this position when using a monaural microphone.

The reference input level is -60 dBs.

MIC +48 V : Set to this position when a microphone (phantom microphone) requiring +48 V DC power supply is connected.

CAUTION:

When connecting a component that does not require +48 V power supply, make sure that the LINE/MIC switch is not set to MIC +48V.

Neglecting this could cause damage to the connected component.

50