Connection Terminals | Electrolux 9CHG584099, WFXUOAOOOO, WFWUOFOOOO

INSTALLATION INSTRUCTIONS

4.ELECTRICAL CONNECTION

Each appliance is accompanied by a complete connection and wiring diagram enclosed. This contains full details of the technical specifications (electrical rating, voltage, amperage etc.)

Check and ensure that the mains voltage agrees with the voltage given on the specification plate.

N.B.:

•The corresponding arrangements must be made on-site for the earthing connection and fuse protection for the appliances.

•The appliance must be connected to a potential

equalization system with a minimum conductor cross- section of 10 mm². The correspondingly marked connection terminal must be used for this purpose. When set up in block configuration, all appliances must be interconnected as potential equalization.

•The appliance is designed for connection to fixed lines. If the appliance is fitted directly to a masonry plinth without an appliance plinth, the supply must be located at the prescribed place. In this case, the protecting tube may not protrude from the plinth. If a CNS base is used, the protecting tube may not protrude more than 10 cm from the floor.

•After installation, the shock-hazard protection for live and functionally insulated parts must be secured.

•An isolating device working on all poles and with a minimum contact opening of 3 mm must be provided on site.

•When faulty-current circuit breakers are used, ones for a rated tripping current of 30 mA should be used.

•When using a faulty current-operated circuit-breaker (in the case of an existing circuit-breaker and for new installations) only a one pulse-current sensitive faulty current-operated circuit-breaker may be connected in series in conjunction with these appliances.

4.1CONNECTION TERMINALS

A = Mains connection

G = Appliance outgoing section

Fig.9 Connection terminals

Power is taken from a ready-installed electric cable which protrudes 1.5 m from the floor or the wall.

The connection terminals for the appliance are located behind the front right-hand cover (B). In order to connect the appliance, the front panel must be removed (see Chapter 2.1 on page 6).

Power cable connection as per the electrical diagram.

The terminal screws on the range frame are marked as follows:

4.2CONNECTION TO THE POTENTIAL EQUALIZATION SYSTEM

The appliance is to be connected to a potential equalization system with a minimum conductor cross-section of 10 mm². Use the appropriately marked terminal studs for this purpose (EN 60 335). The connection consists of an M6 threaded bolt and is located on the frame of the appliance.

Connection as per sketch.

1Cable shoe * 6 mm

2Nut M 6

3Spring washer M 6

4Washer M 6

Fig.10 Connection to the potential equalization system

Earth wire Potential equalization

Additional terminals for power optimizing systems (EO/SI) or potential-free contacts (PK) for the external monitoring of the appliance are available as options. The connections are made as per the electrical diagram.

62.9585.01_UL

Page 7

9CHG584097, WFXROFOOOO, WFWUOFOOOO, 584094, 9CHG584093 specifications

The Electrolux WFWROFOOOO and its associated models, including 584096, 9CHG584095, 9CHG584094, and 584100, are a testament to innovation and efficiency in modern laundry care. Designed with a keen understanding of consumer needs, these washers bring together advanced technologies and features aimed at providing superior cleaning performance while keeping energy consumption low.

One of the standout features of these washer models is their cutting-edge SmartBoost technology. This innovative system pre-mixes water and detergent before the wash cycle begins, ensuring that every fabric receives optimal cleaning power. This feature not only enhances the removal of stains but also promotes a more thorough and even wash, reducing the chances of detergent residue left on clothes.

The Electrolux WFWROFOOOO series is notable for its energy efficiency. With an ENERGY STAR certification, these machines are designed to consume less water and electricity compared to traditional washers. This eco-friendly approach not only benefits the environment but also translates to savings on utility bills for the consumer.

Another impressive characteristic of these washers is their capacity. With large drum sizes, they are capable of handling large loads, which makes laundry chores more efficient. This is particularly beneficial for families or individuals who require frequent washing, as it reduces the number of cycles needed to manage weekly laundry.

These models are equipped with various wash cycle options, tailored to suit different fabric types and cleaning needs. From delicate cycles for fragile items to heavy-duty cycles for tough stains, users can select the perfect setting for every load. Additionally, features like steam cleaning and sanitize cycles enhance the performance of these machines, ensuring optimal hygiene and cleanliness.

The Electrolux WFWROFOOOO series also emphasizes user convenience. Intuitive controls, along with the ability to customize settings, make operation straightforward and hassle-free. Many models include a delay start option, allowing users to schedule their laundry for times that best fit their lifestyle.

In summary, the Electrolux WFWROFOOOO, 584096, 9CHG584095, 9CHG584094, and 584100 represent a blend of modern technology, energy efficiency, and user-friendly features. With their commitment to superior cleaning performance and innovative functionalities, these washers have set a new standard in laundry care, making them an excellent choice for consumers seeking reliability and excellence.