Electrolux D2100-5 manual Installation Instructions, Do not lift the appliance by the handles

Page 29

INSTALLATION INSTRUCTIONS

WARNINGS

•This appliance must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions.

•This appliance must be earthed.

•Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 1).

•Before connecting the appliance make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This is situated on the lower front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

•Do not alter the electrical circuitry of this appliance.

THINGS TO NOTE

•This appliance is designed to be fitted in cabinets of the recommended dimensions as shown (Fig.3).

•If your cabinet interior dimension is between 565- 570mm the oven may still be fitted. However, a minor modification to the cabinet will be required to reduce the aperture size down to 560-565 mm, to allow the product to be securely screwed into the cabinet.

•The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.

•Enquiries regarding the installation of the cooker point, if required, should be made to your Regional Electricity Company to ensure compliance with their regulations.

•The appliance socket switch should be outside the cabinet but within 2m of the appliance to make it accessible to switch off the appliance in case of an emergency.

•To protect the hands, wear gloves when lifting the oven into its housing.

Do not lift the appliance by the handles.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.

Fig.1

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Competence D2100-5 Important Safety Information Contents BUILT-IN Electric Fanned Double Oven Description of the ApplianceControl Panel Getting to Know Your ApplianceTelescopic Runners Grill and Oven FurnitureBefore Using the Appliance HOW to SET the Countdown Electronic TimerHOW to SET the Time of DAY To SET the Timer to Switch on and OFF Automatically To Cancel the CountdownSetting the Oven Timer Control To Cancel AN Automatic Programme To SET the Timer to Switch OFF onlyTo Return the Appliance to Manual Things to NoteFull Width Dual Grill Using Full Width Dual GrillUsing the Telescopic Runners Hints and Tips Grill PAN and HandlesFood Grilling ChartTo FIT the Second Oven Shelf Using Second OvenSecond Oven Hints and Tips To FIT the Main Oven Shelves Using Ventitherm FAN Operated CookingVentitherm FAN Operated Cooking Retaining Hook Form Oven Cooking Chart Meattemperature Roasting ChartFAN Controlled Defrosting Using FAN Controlled DefrostingCleaning Materials Care and CleaningCleaning the Outside of the Appliance Removing and Replacing Wirework RunnersCleaning the Doors Cleaning Inside the OvensCleaning the Second Oven Roof Cleaning the Grill and Oven Furniture To Clean the Inner Glass Door PanelsTo Remove the Inner Glass To Replace the Inner Glass PanelReplacing AN Oven Light Bulb TOP Oven Replacing AN Oven Light Bulb Main OvenSomething not Working Grill, ovens and timer do not workService and Spare Parts Standard guarantee conditions Guarantee ConditionsTechnical Details Do not lift the appliance by the handles Installation InstructionsPreparing Cabinet for Fitting of Oven Choice of Electrical ConnectionBuilt In Installation Recommended Cabinet Dimensions in MillimetresTo Remove Cover of Mains Terminal HOW to Finish UnpackingChecking Electrical Connections Connecting to the Mains TerminalConnecting to a HOB or Cooker Point Fitting Into the Cabinet Page LU4 9QQ Telephone 0870 5
Top Page Image Contents