Electrolux D2100-5 manual Choice of Electrical Connection, Preparing Cabinet for Fitting of Oven

Page 30

CHOICE OF ELECTRICAL CONNECTION

•There are three possible ways to connect your

appliance. In each case the appliance should be operated using at least 6mm2 twin core and earth PVC insulated. Please choose from the most appropriate after reading the different methods:-

a)By connecting the appliance to a cooker point (having a double pole isolating switch with at least 3mm contact separation in all poles and neutral) and protected with a fuse or miniature circuit breaker at your mains fuse box.

Subject to Regional Electricity Companies regulations if you wish to connect the oven and hob to the power supply you may use one of the following two methods:-

b)By connecting the appliance together with a hob directly to a cooker point(s). Having a double pole isolating switch with at least 3mm contact separation in all poles and neutral.

c)If you wish to connect an oven and a hob to a cooker point you can by connecting the oven and hob separately to the cooker point. Oven and hob units should be separately connected to a cooker point. See Fig. 2.

NOTE: It is good practice to :

•Fit an Earth Leakage Circuit Breaker to your house wiring.

•Wire your appliance to the latest IEE regulations.

PREPARING CABINET FOR FITTING OF OVEN

•Make sure that the cabinet is the correct size for the appliance to be fitted (Ref. Fig. 3).

•If the size is between 565-570mm, then the cabinet should be modified so that at the screw fixing points the recommended dimension of at least 560-565mm is maintained. The modification should ideally be localised to ensure that after screw fitment the oven is securely fixed into position.

•The cabinet must be stable and level by firmly securing it to the wall or floor. If necessary, make arrangements to ensure the shelf upon which the oven will rest is level.

•When the appliance is installed ensure a minimum gap of 2mm is maintained between the trim on the bottom edge of the appliance, and any corresponding door / panel underneath.

Fig. 2

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Competence D2100-5 Important Safety Information Contents Description of the Appliance BUILT-IN Electric Fanned Double OvenGetting to Know Your Appliance Control PanelGrill and Oven Furniture Telescopic RunnersBefore Using the Appliance Electronic Timer HOW to SET the Time of DAYHOW to SET the Countdown To Cancel the Countdown Setting the Oven Timer ControlTo SET the Timer to Switch on and OFF Automatically To Return the Appliance to Manual To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme Things to NoteUsing Full Width Dual Grill Using the Telescopic RunnersFull Width Dual Grill Grill PAN and Handles Hints and TipsGrilling Chart FoodUsing Second Oven Second OvenTo FIT the Second Oven Shelf Hints and Tips Using Ventitherm FAN Operated Cooking Ventitherm FAN Operated CookingTo FIT the Main Oven Shelves Retaining Hook Form Oven Cooking Chart Roasting Chart MeattemperatureUsing FAN Controlled Defrosting FAN Controlled DefrostingCleaning the Outside of the Appliance Care and CleaningCleaning Materials Removing and Replacing Wirework RunnersCleaning Inside the Ovens Cleaning the Second Oven RoofCleaning the Doors To Remove the Inner Glass To Clean the Inner Glass Door PanelsCleaning the Grill and Oven Furniture To Replace the Inner Glass PanelReplacing AN Oven Light Bulb Main Oven Replacing AN Oven Light Bulb TOP OvenGrill, ovens and timer do not work Something not WorkingService and Spare Parts Guarantee Conditions Standard guarantee conditionsTechnical Details Installation Instructions Do not lift the appliance by the handlesChoice of Electrical Connection Preparing Cabinet for Fitting of OvenRecommended Cabinet Dimensions in Millimetres Built In InstallationHOW to Finish Unpacking To Remove Cover of Mains TerminalConnecting to the Mains Terminal Connecting to a HOB or Cooker PointChecking Electrical Connections Fitting Into the Cabinet Page LU4 9QQ Telephone 0870 5
Top Page Image Contents