ELECTRONIC TIMER
KEY
ACOOK TIME
BEND TIME
CCOUNTDOWN
DTIME
EDECREASE CONTROL
FSELECTOR CONTROL
GINCREASE CONTROL
NOTE:
The time of day must be set before the main oven will operate manually.
1. HOW TO SET THE TIME OF DAY
The oven has a 24 hour clock.
When the electricity supply is first switched ON, the display will show 12.00 and the 'Time' ( ) indicator neon will flash as Fig. 1.
To set the correct time press the increase control button ( + ) and if necessary, the decrease control button ( - ) until the correct time on the 24 hour clock is reached, e.g. 10.00am as Fig.2. The 'Time' indicator neon ( ) will flash for 5 seconds and then go out.
Note: The increase and decrease control buttons operate slowly at first, and then more rapidly. They should be pressed separately.
2. HOW TO SET THE COUNTDOWN
The 'Countdown' gives an audible reminder at the end of any period of cooking. This cooking period may be up to 2 hrs 30 mins. It is not part of the automatic control.
To set, press the Selector Control button ( 
) until
the 'Countdown' indicator neon ( 
) is illuminated the display reads 0.00 as Fig.3.
To set the correct time duration depress the increase control ( + ) until the display indicates the interval to be timed, e.g. 1hr 45 mins as Fig. 4. If necessary depress the decrease control ( - ) to achieve the correct time interval.
NOTE: This must be completed within 5 seconds of first pressing the Selector Control button.
During the operation of the 'Countdown', the remaining time period will be shown in the display. The 'Countdown' will sound intermittently for up to 2 minutes at the end of the timed period. The sound can be stopped by pressing any button.
A
B
E F G
Fig.1.
Fig.2.
Fig.3.
Fig.4.
C D
8