5.0 EVF and EVH Rigging System (cont’)
5.22 VRK Kits and Vertically Rigged Clusters
A basic three-enclosure vertical hang is shown in Figure 21. The following components are necessary to construct this cluster:
1.One VRK-1 vertical rigging kit for EVF to EVF.
2.One VRK-2 vertical rigging kit for EVF to EVF subwoofer.
3.Four M10 eyebolts from the supplied EVI-M10K eyebolt kit (to suspend the top cabinet).
EVI-M10K Kit
(Sold Separately)
| VRK-1 Kit | EVF Full-Range | |
| (Sold Separately) | |
| System | Stabilizer Bars |
| |
| | |
Figure 21a:
Basic three-enclosure vertical hang of an EVF subwoofer on top and two EVF full-range systems below, using one each VRK-1 and VRK-2 kits (optional acces- sories) and four eyebolts (supplied with
systems), using a moderate trim angle
Figure 21c: Basic three-enclosure vertical hang of
an EVF subwoofer on top and two EVF full-range systems below, using one each VRK-1 and VRK-2 kits (optional acces- sories) and four eyebolts (supplied with
systems), using an extreme trim angle
Figure 21b:
Basic three-enclosure vertical hang of an EVF subwoofer on top and two EVF full-range systems below, using one each VRK-1 and VRK-2 kits (optional acces- sories) and four eyebolts (supplied with systems), using a more extreme trim angle
Electro-Voice EVF/EVH User Manual | 31 |
