Electrolux EFC 9670-6670 First decide which functioning version is better for you, 5 x 6,5

22electrolux installation

First decide which functioning version is better for you

GB If you decide to use the hood in exhausting version we suggest you position the upper section of the chimney so that the oulet slots are not visible once installation has ended, on the contrary if it is decided to use the hood in recycling version BE SURE that the side with the slots is upright (see also A-B-C sequence).

Assembling the chimney flue support/bracket (3 parts)

The three parts should be fixed with 4 screws, the support extension is adjustable and should correspond to the internal width of the telescopic chimney flue.

Assembling the deflector (3 parts – only for filter version):

The three parts should be fixed with 2 screws, the deflector extension is adjustable and should correspond to the width of the chimney flue support, to which it is then fixed.

B

180°

A

C - OK!

4 x Ø 4x8

G

=

X =

X

=	X
	=
F

6 x

Ø 3,5 x 6,5

G

F