Electrolux E40PV100FS installation instructions Verify Package Contents

Page 13

Installation 13

VERIFY PACKAGE CONTENTS

Unpack hood and check contents.

You should receive:

1 - Hood

1 - Decorative Flue Assembly

1 - Support Frame

1 - Duct Collar

1 - Parts Bag containing:

8 - Washers ø 6.4

4 - Washers ø 4.5

4 - Lag Bolts

8 - Mounting Screws (3.9 X 9.5mm Pan Head)

4 - Hex Nuts

1 - Installation Instructions

2 - Warranty Cards

4 HEX NUTS

DUCT COLLAR

DECORATIVE	SUPPORT	8 WASHERS	4 Lag Bolts
FLUE	FRAME	ø6.4	(6x70mm)

Figure 4

4 WASHERS	8 MOUNTING SCREWS
ø4.5	(3.9 x 9.5mm Pan Head)

Image 13

Contents Use & Care Guide Installation Instructions Read and Save These Instructions Finding InformationQUESTIONS? 877- 4ELECTROLUXTable of Contents Important Safety Instructions SafetySafety Precautions Safety Safety Operating Your Hood Getting StartedAuto-Start Heat Sensing System Halogen Bulbs OperationBulb may be hot Use of a fuse greater than 4 amps may damage the transformer Fuse ReplacementCleaning the Filters and Hood Care and CleaningHood Cleaning Grease FiltersInstallation Planning InstallationVerify Package Contents To reduce the risk of ﬁre, use only metal ductwork Installing the DuctworkInstalling the Support System Installation15Requires optional 10-foot ﬂue extension model EXPV100S Installing the Duct Collar Connecting the Decorative FlueMounting the Hood to Support Frame Installing the ElectricalReplacing the Bottom Trim Connecting the DuctworkPrior to use, remove protective ﬁlm from the ﬁlter frame Installing the FiltersIf Service is Required TroubleshootingProblem Possible Cause Remedy Troubleshooting GuideEnergy Saving Tips Saving EnergyPage Hood Warranty Your hood is protected by this warranty Warranty