Electrolux E40PV100FS Connecting the Decorative Flue, Installing the Duct Collar

Page 16

CONNECTING THE DECORATIVE FLUE

1Secure the upper ﬂue to the upper support frame with the mounting screws (3.9 x 9.5mm).

2Insert the lower ﬂue moving it completely towards the top and secure it temporarily with retaining screws (3.9 x 9.5mm).

MOUNTING

SCREWS

(3.9 x 9.5mm)

UPPER

FLUE

LOWER

FLUE

Figure 9

INSERT THE LOWER FLUE

RETAINING

SCREW (3.9 x 9.5mm)

Figure 10

1 Fold the 2 tongues outwards.

2Secure the discharge collar to the hood with (2) retaining screws (3.90 x 9.5mm).

TON-

Figure 11

Image 16

Contents Use & Care Guide Installation Instructions Finding Information Read and Save These InstructionsQUESTIONS? 877- 4ELECTROLUXTable of Contents Safety Important Safety InstructionsSafety Precautions Safety Safety Operating Your Hood Getting StartedAuto-Start Heat Sensing System Halogen Bulbs OperationBulb may be hot Fuse Replacement Use of a fuse greater than 4 amps may damage the transformerCare and Cleaning Cleaning the Filters and HoodHood Cleaning Grease FiltersInstallation Installation PlanningVerify Package Contents Installing the Ductwork To reduce the risk of ﬁre, use only metal ductworkInstalling the Support System Installation15Requires optional 10-foot ﬂue extension model EXPV100S Connecting the Decorative Flue Installing the Duct CollarInstalling the Electrical Mounting the Hood to Support FrameConnecting the Ductwork Replacing the Bottom TrimInstalling the Filters Prior to use, remove protective ﬁlm from the ﬁlter frameTroubleshooting If Service is RequiredTroubleshooting Guide Problem Possible Cause RemedySaving Energy Energy Saving TipsPage Warranty Hood Warranty Your hood is protected by this warranty