Electrolux FAVORIT 44080 i manual Switching Off the dishwasher, Removing the Dishes

Page 21

3.Select dishwashing cycle.

The LED indicator for the programme selected and the indicator next to the number of hours will light up.

The dishwashing cycle will start automatically following a countdown of the hours set.

To change the time delay:

As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button.

Cancelling the delay timer:

Press the DELAY TIMER button repeatedly until none of the three time displays is lit. The selected dishwashing cycle will begin immediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dish- washing cycle. First cancel the dishwashing cycle, then re-set the time delay, lastly select the new dishwashing cycle.

Switching Off the dishwasher

Do not switch off the dishwasher until the indicator for the end of the dishwasher cycle is illuminated in the cycle progress display.

1.Press the ON/OFF button. All display indicators will go out.

2.Turn off the water tap.

1

3

Carefully open the door. Hot steam may escape.

Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about 15 minutes before removing them. You also get a better drying result.

Dishes dry more quickly if you open the door for a moment after the cycle has ended and then leave it slightly open.

Removing the Dishes

It is normal for the inner door and the dispensers to be damp.

Empty the lower basket first, then the upper basket. This way you avoid dripping water from the upper basket onto dishes in the lower basket.

21

Image 21
Contents Favorit 44080 Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyControl Panel Diagram of ApplianceControl indicators have the following meanings Setting the Water Softener Prior to Using for the First TimeSetting manually Setting electronicallySetting Adding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Adjusting the Height of the Upper Basket Adding DetergentRaising / Lowering the upper bas- ket Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSuitable Type Selecting the dishwashing cycle Cycle TableSelecting a programme Setting the Delay Timer Interrupting or Cancelling a dishwashing cycleCancelling the wash programme Starting a Dishwashing CycleTo change the time delay Switching Off the dishwasherCancelling the delay timer Removing the DishesCleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm Remedying small malfunctions What to do ifIndicator for the end Dishwashing cycle is Dishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shining There are dried water drops on the glasses and dishesDisposal Packaging materialOld appliance Technical Data Full load Half load Example loading arrangementsPage Safety Information for the Installation Installation and connection instructionsDishwashers That Can be Integrated Installing the DishwasherConnecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureAnti-flood system Water drainageElectrical Connection Changing a fuseGreen and Yellow Earth BlueNeutral BrownLive Connecting systems Great Britain Warranty conditionsCustomer Care For general enquiries concerning 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG