Electrolux FAVORIT 44080 i manual Installing the Dishwasher, Dishwashers That Can be Integrated

Page 33

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted to en- sure that it is stable and level in all directions.

• To compensate for unevenness in the floor and to match the height of the appliance to that of sur- rounding units, extend the thread- ed feet using a screwdriver.

•Adjust the rear feet of the appli- ance using a screwdriver from the front of the appliance. (See instal- lation instructions.)

•The drain hose, inlet hose and mains cable must be laid so that they are able to move freely within the plinth area, and so that they

are not kinked or crushed when the dishwasher is in position.

•The dishwasher must also be screwed tightly to the work surface or to the adjoining units. This is essential to ensure the dishwasher does not tip up.

Dishwashers That Can be Integrated

(see installation template supplied)

3 The door of the appliance can be fitted with a wooden door/cupboard door with the following dimensions:

Width:	591 – 594 mm

Depth:	16 – 24 mm
Height:	dependent on	– Recess height
(variable)		– Plinth height
		– Adjusting the dishwasher to match the height of
		adjoining units
		The exact height must be measured at the place of in-
		stallation from the adjoining units.
Weight:	max. 8 kg

33

Image 33

Contents Favorit 44080 Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyControl Panel Diagram of ApplianceControl indicators have the following meanings Setting the Water Softener Prior to Using for the First TimeSetting manually Setting electronicallySetting Adding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Adjusting the Height of the Upper Basket Adding DetergentRaising / Lowering the upper bas- ket Detergent tablets Concentrated detergentsIf you want to use 3in1 products Using 3in1 detergentsIf you do not want to use 3in1 products any more If you want to use 4in1 productsSuitable Type Selecting the dishwashing cycle Cycle TableSelecting a programme Setting the Delay Timer Interrupting or Cancelling a dishwashing cycleCancelling the wash programme Starting a Dishwashing CycleTo change the time delay Switching Off the dishwasherCancelling the delay timer Removing the DishesCleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm Remedying small malfunctions What to do ifIndicator for the end Dishwashing cycle is Dishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shining There are dried water drops on the glasses and dishesDisposal Packaging materialOld appliance Technical Data Full load Half load Example loading arrangementsPage Safety Information for the Installation Installation and connection instructionsDishwashers That Can be Integrated Installing the DishwasherConnecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureAnti-flood system Water drainageElectrical Connection Changing a fuseGreen and Yellow Earth BlueNeutral BrownLive Connecting systems Great Britain Warranty conditionsCustomer Care For general enquiries concerning 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG