Electrolux ESL 6251 Setting the Delay Timer, Switching Off the dish- washer, Removing the Dishes

Setting the Delay Timer

3With the delay timer you can delay the start of a dishwashing cycle for between 1 and 19 hours.

1.Press the Delay Timer button repeatedly until the multi-display shows the desired time delay, for ex- ample 12h, if the cycle is to start in 12 hours. The Delay Timer indicator is illuminated.

2.Select dishwashing cycle.

3.The time remaining to the start of the cycle is con- tinuously displayed (e. g. 12h, 11h, 10h, … 1h etc.).

To change the time delay:

As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button.

Cancelling the time delay:

Press the Delay Timer button repeatedly until the length of the selected cycle appears in the multi-dis- play. The selected dishwashing cycle will begin im- mediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dishwashing cycle. First cancel the dish- washing cycle, then re-set the time delay, lastly se- lect the new dishwashing cycle.

Switching Off the dish- washer

If the acoustic signal has been enabled, a continuous tone will sound for 15 seconds at the end of the dish- washing cycle.

If the dishwasher door is not opened, the acoustic signal sounds again after 3 and 6 minutes.

1 Carefully open the door. Hot steam may es- cape.

•Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about 15 minutes before re- moving them. You also get a better drying result.

•Dishes dry more quickly if you open the door for a moment after the cycle has ended and then leave it slightly open.

1.Press the ON/OFF button. All display indicators will go out.

2.Turn off the water tap.

Removing the Dishes

3It is normal for the inner door and the dispens- ers to be damp.

•Empty the lower basket first, then the upper bas- ket. This way you avoid dripping water from the upper basket onto dishes in the lower basket.

22