Electrolux ESL 6251 manual Installing the Dishwasher, Dishwashers that can be fully inte- grated

Page 33

Installing the Dishwasher

The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level in all directions.

To compensate for unevenness in the floor and to match the height of the appliance to that of sur- rounding units, extend the threaded feet using a screwdriver.

The drain hose, inlet hose and mains cable must be laid so that they are able to move freely within the plinth area, and so that they are not kinked or crushed when the dishwasher is in position.

The dishwasher must also be screwed tightly to the work surface or to the adjoining units. This is essential to ensure the dishwasher does not tip up.

Dishwashers that can be fully inte- grated

(see installation template supplied)

3The door of the appliance can be fitted with a wooden door/cupboard door with the follow- ing dimensions:

Width:

591 mm - 594 mm

 

 

Thickness:

16 mm – 24 mm

 

 

Height:

max. 715 mm

 

 

Weight:

max. 10 kg

 

 

Using the installation template supplied, split cup- board doors can be easily installed and firmly fitted.

33

Image 33
Contents User information Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety General SafetyControl Panel Diagram of ApplianceFunction button Refill with dishwasher saltRefill with rinse aid Prior to Using for the First Time Setting the Water SoftenerSetting manually III Setting electronicallyAdding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating/deactivating the acoustic signal Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Type Raising / Lowering the upper basket Adjusting the Height of the Upper BasketMaximum height of dishes Upper basket Lower basketAdding Detergent Using 3in1 detergents Concentrated detergentsDetergent tablets Programme Sequence Dishwashing Suitable Type Selecting the dishwashing cycle Cycle TableFor Soiling Consumption Values2Selecting a programme Interrupting or Cancelling a dish- washing cycle Cancelling the wash programmeStarting a dishwashing cy- cle Setting the Delay Timer Switching Off the dish- washerRemoving the Dishes Cleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm Remedying small malfunc- tions What to do ifMalfunction Possible cause Remedy Short warning tone, continuMalfunction Possible cause Remedy Dishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishesDisposal Packaging materialOld appliance Dishwashers that can be fully integrated Technical dataLower basket with cutlery basket Cutlery basket Sample loading arrangementsSafety Information for the Installation Dishwashers that can be fully inte- grated Installing the DishwasherConnecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureAnti-flood system Water drainageChanging a fuse Electrical ConnectionConnecting systems European Guarantee Standard guarantee conditionsThis guarantee does not cover ExclusionsFor Customer Service in the Republic of Ireland please con 0870 5 929Customer Care Electrolux plc