Electrolux ESF 45010 First use, Water hardness Adjusting the water Hardness setting Mmol/l

Page 11

first use electrolux 11

First use

Before using your dishwasher for the first time:

●Ensure that the electrical and water connections comply with the installation instructions

●Remove all packaging from inside the appliance

●Set the water softener

●Pour 1 litre of water inside the salt container and then fill with dishwasher salt

●Fill the rinse aid dispenser

If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc... set the 3 in 1 function (see "3 in 1 function").

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, German degrees (°dH), French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

Water hardness

Adjusting the water

 

 

 

hardness setting

°dH

°TH

mmol/l

manually

electronically

51 - 70

91 - 125 9,0 - 12,5

2

level 10

43 - 50

76 - 90

7,6 - 8,9

2

level 9

37 - 42

65 - 75

6,5 - 7,5

2

level 8

29 - 36

51 - 64

5,1 - 6,4

2

level 7

23 - 28

40 - 50

4,0 - 5,0

2

level 6

19 - 22

33 - 39

3,3 - 3,9

2

level 5

15 - 18

26 - 32

2,6 - 3,2

1

level 4

11 - 14

19 - 25

1,9 - 2,5

1

level 3

4 - 10

7 - 18

0,7 - 1,8

1

level 2

< 4

< 7

< 0,7

1

level 1

*no salt is necessary

Use of

salt

yes yes yes yes yes yes yes yes yes no *

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Dishwasher ESF We were thinking of you Welcome to the world of Electrolux Contents Correct use Safety informationGeneral safety Child safetyInstallation Product description Control panel Indicator lights Setting mode Use Salt Water hardness Adjusting the water Hardness setting Mmol/lFirst use Examples Setting manually Dishwasher is factory set at positionSetting electronically Dishwasher is factory set at level To fill Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Daily useElectrolux daily use Lower basket Cutlery basket Upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketMaximum height of the dishes Upper Basket Lower BasketDetergent tablets Use of detergentFill with detergent Activation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Setting and starting the programme with delay start Programme in progress indicator light illuminatesEnd of the washing programme Cancelling the delay startCancel a washing programme in progress End of programme indicator light will illuminateUnloading the dishwasher Type of load Washing programmesProgramme Degree SoilCleaning the filters Care and cleaningNever try to remove the spray arms External cleaningInternal cleaning Frost precautionsSomething not working Fault code and malfunctionPossible cause and solution Malfunction Wash results are not satisfactory Dishes are not clean Dishes are wet and dullTechnical data Energy Consumption KWh Water Litres Consumption values ProgrammeProgramme Duration Minutes Hints for test institutes Full load 9 standard place settingsLevelling InstallationFitting under a counter kitchen worktop or sink Proceed as followsLocknut must be correctly fitted to avoid water leaks Water supply connectionsWater inlet hose with safety valve Water outlet hose connection Electrolux installation Old appliance Environment concernsPackaging material European guarantee Albania Belgique/België/Belgien Electrolux Electrolux Electrolux Page 117997 87/1-01-26042007
Top Page Image Contents