Electrolux ESF 45010 user manual Water inlet hose with safety valve

Page 38

38 electrolux installation

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

●The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

●If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

●A water inlet hose with safety valve must only be replaced by the Service Force Centre.

●Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

Warning!

Dangerous voltage

Image 38

Contents Dishwasher ESF We were thinking of you Welcome to the world of Electrolux Contents Child safety Safety informationGeneral safety Correct useInstallation Product description Control panel Indicator lights Setting mode Use Salt Water hardness Adjusting the water Hardness setting Mmol/lFirst use Examples Setting manually Dishwasher is factory set at positionSetting electronically Dishwasher is factory set at level Filling with dishwasher salt To fillFilling with rinse aid Daily use Loading cutlery and dishesElectrolux daily use Lower basket Cutlery basket Upper basket Lower Basket Adjusting the height of the upper basketMaximum height of the dishes Upper Basket To move to the higher position proceed as followsDetergent tablets Use of detergentFill with detergent Activation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Programme in progress indicator light illuminates Setting and starting the programme with delay startEnd of programme indicator light will illuminate Cancelling the delay startCancel a washing programme in progress End of the washing programmeUnloading the dishwasher Degree Soil Washing programmesProgramme Type of loadCare and cleaning Cleaning the filtersFrost precautions External cleaningInternal cleaning Never try to remove the spray armsSomething not working Fault code and malfunctionPossible cause and solution Malfunction Dishes are not clean Dishes are wet and dull Wash results are not satisfactoryTechnical data Energy Consumption KWh Water Litres Consumption values ProgrammeProgramme Duration Minutes Full load 9 standard place settings Hints for test institutesProceed as follows InstallationFitting under a counter kitchen worktop or sink LevellingWater supply connections Locknut must be correctly fitted to avoid water leaksWater inlet hose with safety valve Water outlet hose connection Electrolux installation Old appliance Environment concernsPackaging material European guarantee Albania Belgique/België/Belgien Electrolux Electrolux Electrolux Page 117997 87/1-01-26042007