Electrolux ESF 45010 user manual Wash results are not satisfactory

Page 32

32 electrolux something not working

The wash results are not satisfactory

The dishes are not clean

The dishes are wet and dull

There are streaks, milky spots or a bluish coating on glasses and dishes

Water drops have dries onto glasses and dishes

The wrong washing programme has been selected.

The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

The spray arms do not rotate freely due to incorrect arrangement of the load.

The filters in the base of the washing compartment are dirty or incorrectly positioned.

Too little or no detergent has been used.

Where there are limescales deposits on the dishes; the salt container is empty or the incorrect level of the water softener has been set.

The drain hose connection is not correct.

The salt container cap is not properly closed.

Rinse aid was not used.

The rinse aid dispenser is empty.

Decrease rinse aid dosing.

Increase rinse aid dosing.

The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.

If after all these checks, the problem persists, contact your local Service Force Centre.

Image 32
Contents Dishwasher ESF We were thinking of you Welcome to the world of Electrolux Contents Safety information General safetyChild safety Correct useInstallation Product description Control panel Indicator lights Setting mode Use Salt Water hardness Adjusting the water Hardness setting Mmol/lFirst use Examples Setting manually Dishwasher is factory set at positionSetting electronically Dishwasher is factory set at level Filling with dishwasher salt To fillFilling with rinse aid Daily use Loading cutlery and dishesElectrolux daily use Lower basket Cutlery basket Upper basket Adjusting the height of the upper basket Maximum height of the dishes Upper BasketLower Basket To move to the higher position proceed as followsDetergent tablets Use of detergentFill with detergent Activation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Programme in progress indicator light illuminates Setting and starting the programme with delay startCancelling the delay start Cancel a washing programme in progressEnd of programme indicator light will illuminate End of the washing programmeUnloading the dishwasher Washing programmes ProgrammeDegree Soil Type of loadCare and cleaning Cleaning the filtersExternal cleaning Internal cleaningFrost precautions Never try to remove the spray armsSomething not working Fault code and malfunctionPossible cause and solution Malfunction Dishes are not clean Dishes are wet and dull Wash results are not satisfactoryTechnical data Energy Consumption KWh Water Litres Consumption values ProgrammeProgramme Duration Minutes Full load 9 standard place settings Hints for test institutesInstallation Fitting under a counter kitchen worktop or sinkProceed as follows LevellingWater supply connections Locknut must be correctly fitted to avoid water leaksWater inlet hose with safety valve Water outlet hose connection Electrolux installation Old appliance Environment concernsPackaging material European guarantee Albania Belgique/België/Belgien Electrolux Electrolux Electrolux Page 117997 87/1-01-26042007