Electrolux ESF 45010 user manual Activation/deactivation of the 3 in 1 function

Page 22

22electrolux daily use

"3 in 1 function"

This appliance is equipped with the "3 in 1 function", that allows the use of the "3 in 1" combi detergent tablets.

These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...)

Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.

With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

Select the "3 in 1 function" before the start of a washing programme.

Once this function is selected (indicator light illuminated) it will remain active also for the following washing programmes.

With the use of the "3 in 1 function", the cycle durations may change.

Once the programme is running, the "3 in 1 function" can NO longer be changed. If you want to exclude the "3 in 1 function" you have to cancel the programme setting and then deactivate the "3 in 1 function".

In this case you have to set a washing programme (and desired options) again.

Activation/deactivation of the 3 in 1 function

Press simultaneously the two buttons positioned over the writing 3 in 1, until the "3 in 1 function "indicator light illuminates. This means that the function is active.

To deactivate the function press the same buttons again until the indicator light corresponding to the "3 in 1" symbol turns off.

If the drying results are not satisfactory we suggest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

The activation/deactivation of the rinse aid dispenser can only be possible with the "3 in 1 function" active.

Image 22
Contents Dishwasher ESF We were thinking of you Welcome to the world of Electrolux Contents Child safety Safety informationGeneral safety Correct useInstallation Product description Control panel Indicator lights Setting mode First use Water hardness Adjusting the water Hardness setting Mmol/lUse Salt Setting electronically Dishwasher is factory set at level Setting manually Dishwasher is factory set at positionExamples Filling with dishwasher salt To fillFilling with rinse aid Daily use Loading cutlery and dishesElectrolux daily use Lower basket Cutlery basket Upper basket Lower Basket Adjusting the height of the upper basketMaximum height of the dishes Upper Basket To move to the higher position proceed as followsFill with detergent Use of detergentDetergent tablets Activation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Programme in progress indicator light illuminates Setting and starting the programme with delay startEnd of programme indicator light will illuminate Cancelling the delay startCancel a washing programme in progress End of the washing programmeUnloading the dishwasher Degree Soil Washing programmesProgramme Type of loadCare and cleaning Cleaning the filtersFrost precautions External cleaningInternal cleaning Never try to remove the spray armsPossible cause and solution Fault code and malfunctionSomething not working Malfunction Dishes are not clean Dishes are wet and dull Wash results are not satisfactoryTechnical data Programme Duration Minutes Consumption values ProgrammeEnergy Consumption KWh Water Litres Full load 9 standard place settings Hints for test institutesProceed as follows InstallationFitting under a counter kitchen worktop or sink LevellingWater supply connections Locknut must be correctly fitted to avoid water leaksWater inlet hose with safety valve Water outlet hose connection Electrolux installation Packaging material Environment concernsOld appliance European guarantee Albania Belgique/België/Belgien Electrolux Electrolux Electrolux Page 117997 87/1-01-26042007