Electrolux ESF 45010 user manual Activation/deactivation of the rinse aid dispenser

Page 23

Activation/deactivation of the rinse aid dispenser

1.Press the On/Off button. The dishwasher must be in setting mode.

2.Press simultaneously buttons 2 and 3, until the indicator lights of buttons 1, 2, and 3 start flashing.

3.Press button 2, the indicator lights of buttons 1 and 3 turn off while the indicator light of button 2 goes on flashing.

4.To activate the rinse aid dispenser, press button 2 again, the end of programme indicator light illuminates, indicating that the rinse aid dispenser has been activated.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.

6.To deactivate the rinse aid dispenser again, follow the above instructions until the end of programme indicator light turns off.

daily use electrolux 23

If you decide to turn back to the use of standard detergent system we advise that you:

1.Deactivate the 3 in 1 function.

2.Fill up the salt container and the rinse aid dispenser again.

3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.

4.Adjust the water hardness setting according to the hardness of the water in your area.

5.Adjust the rinse aid dosage.

Image 23
Contents Dishwasher ESF We were thinking of you Welcome to the world of Electrolux Contents Correct use Safety informationGeneral safety Child safetyInstallation Product description Control panel Indicator lights Setting mode Use Salt Water hardness Adjusting the water Hardness setting Mmol/lFirst use Examples Setting manually Dishwasher is factory set at positionSetting electronically Dishwasher is factory set at level To fill Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Daily useElectrolux daily use Lower basket Cutlery basket Upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketMaximum height of the dishes Upper Basket Lower BasketDetergent tablets Use of detergentFill with detergent Activation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Setting and starting the programme with delay start Programme in progress indicator light illuminatesEnd of the washing programme Cancelling the delay startCancel a washing programme in progress End of programme indicator light will illuminateUnloading the dishwasher Type of load Washing programmesProgramme Degree SoilCleaning the filters Care and cleaningNever try to remove the spray arms External cleaningInternal cleaning Frost precautionsSomething not working Fault code and malfunctionPossible cause and solution Malfunction Wash results are not satisfactory Dishes are not clean Dishes are wet and dullTechnical data Energy Consumption KWh Water Litres Consumption values ProgrammeProgramme Duration Minutes Hints for test institutes Full load 9 standard place settingsLevelling InstallationFitting under a counter kitchen worktop or sink Proceed as followsLocknut must be correctly fitted to avoid water leaks Water supply connectionsWater inlet hose with safety valve Water outlet hose connection Electrolux installation Old appliance Environment concernsPackaging material European guarantee Albania Belgique/België/Belgien Electrolux Electrolux Electrolux Page 117997 87/1-01-26042007