Electrolux 64570 Vi manual Starting a dishwashing cycle, Setting the Delay Timer

Starting a dishwashing cycle

1.Check that the spray arms can turn freely.

2.Turn the water tap on fully.

3.Press the ON/OFF button.

4.Select the desired cycle.

The programme indicator comes on. The remaining time expected for the cycle will be shown in the multi-display.

3 During the dishwashing cycle, the remaining time shown in the multi- display may be adjusted according to the size of the load, degree of soiling, etc.

5.Close the door. The dishwashing cycle will begin.

1After the cycle has started, do not open the door again, to prevent scalds and damage to units from escaping steam. Only open the door when the cycle has ended.

Setting the Delay Timer

3 With the delay timer you can delay the start of a dishwashing cycle for between 1 and 19 hours.

1.Press the Delay Timer button repeatedly until the multi-display shows the desired time delay, for example, 12h, if the cycle is to start in 12 hours. The Delay Timer indicator is lit.

2.Select dishwashing cycle.

3.The time remaining until the start of the cycle is continuously displayed (e. g., 12h, 11h, 10h, … 1h etc.).

4.Close the door.

To change the delay timer:

As long as the cycle has not yet started, you can still change the setting by pressing the Delay Timer button after opening the door.

Cancelling the time delay:

Press the Delay Timer button repeatedly until the length of the selected cycle appears in the multi-display. The selected dishwashing cycle will begin immediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dish- washing cycle. First cancel the dishwashing cycle, then re-set the time delay, lastly select the new dishwashing cycle.

22