Electrolux 64570 Vi manual 10L

Page 9

2.Press function buttons 2 and 3 simultaneously and hold them down. The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 1.

The LED indicator for function button 1 will flash. The multi-display will indicate the hardness setting.

4.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).

5.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.

If the water softener is set electronically to “1”, this switches off the control indicator for dishwasher salt.

Water hardness

Adjusting the hardness

Indication on the

 

 

in °fh1))

in °dh2))

setting

multi-display

90 - max. 125

51 - max. 70

103)

10L .

76 - 89

43 - 50

9

9L

65 - 75

37 - 42

8

8L

51 - 64

29 - 36

7

7L

40 - 50

23 - 28

6

6L

33 - 39

19 - 22

5

5L

26 - 32

15 - 18

4*

4L

19 - 25

11 - 14

3

3L

07 - 18

4 - 10

2

2L

 

 

 

 

below 7

below 4

1

1L

no salt necessary

 

 

 

 

 

 

 

1)(°fh) French degree, measure of the hardness of water

2)(°dh) German degree, measure of the hardness of water

3)On this setting the length of the dishwashing cycle may be slightly longer. *) factory setting

9

Image 9
Contents Favorit 64570 Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety Follow the Instructions for installation and connectionRisk of frost General SafetyControl Panel Diagram of ApplianceFunction button Sets the water softener Setting the Water Softener Prior to Using for the First Time10L Adding dishwasher salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Activating/Deactivating the Rinse Aid dispenser Setting the Amount of Rinse Aid RequiredActivating/deactivating the acoustic signal Loading cutlery and dishes Daily useLoading cutlery Load large and heavily soiled dishes in the lower basket Pots, Pans, Large PlatesCups, Glasses, Coffee Service Adjustable cup racksGlass holders Raising/Lowering the Upper Bas- ket Adjusting the height of the upper basketAdding Detergent Using 3in1 detergents Concentrated detergentsDetergent tablets Suitable Type Selecting the dishwashing cycle Cycle TableTo change the delay timer Setting the Delay TimerCancelling the time delay Starting a dishwashing cycleSwitching off the dishwasher Care and cleaningRemoving the Dishes Polished chromium steel surfacesCleaning the filters Coarse filterFine filter Top spray arm Cleaning the spray armsMiddle spray arm Lower spray armRemedying small malfunctions What to do ifMalfunction Possible cause Remedy Short warning tones Dishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shining There are dried water drops on the glasses and dishesDisposal Technical dataPackaging material Old applianceSample loading arrangements Measurement of noiseTeaspoon General Scope of useWater Outlet Hose Connection Water Supply ConnectionHinged door must be fitted with a handle Installing and fitting the hinged doorFitting the hinged door Page Page Page Electrical Connection Changing a fuseGreen and Yellow Earth Blue Neutral Brown Live Permanent Connection Great Britain Warranty conditionsPage 0870 5 929 Service and Spare PartsAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG