Cleaning the spray arms
Regularly check the nozzles in the three spray arms for blockages. If necessary, clean the nozzles with a piece of fine wire or a fine needle and a strong water jet.
1 Do not damage the nozzle openings.
Top spray arm
1.Undo the fixing screw (A) by turning
2.Pull the spray arm off the shaft.
3.Clean the spray arm and the fixing screw.
4.Fasten the spray arm with the fixing screw (A) turning clockwise.
Middle spray arm
1.Remove the middle spray arm by turning it laterally.
The
2.Clean spray arm nozzles.
3.To
Lower spray arm
1.Undo the fixing screw (C) by turning
2.Pull the spray arm off the shaft.
3.Clean the spray arm and the fixing screw.
4.Fasten the spray arm with the fixing screw (C) turning clockwise.
25