Electrolux 65080 VIL manual Adjusting the dose

Page 18

Operating instructions

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Top up the rinse aid when the indicator light on the control panel illuminates.

18

Image 18

Contents Favorit 65080 VIL Following symbols are used in the text Dear customerContents Safety instructions InstallationChild safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashingDescription of the appliance Control panel Digital display indicates1 function 1 function active Indicator light on Indicator light offActivation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Audible signals Deactivation/activation of the audible signalsFactory setting audible signals activated Prior to using for the first time Water softenerSetting manually Setting electronicallyExample ExamplesFilling with dishwasher salt To fillRinse aid Filling with rinse aidEnsure that the lid is closed after every refill Adjusting the dose Daily use Loading cutlery and dishesGlazed patterns may fade if machine washed frequently Lower basket Cutlery basket Upper basket Case that plates are loaded in the upper basket Adjusting the height of the upper basket To move to the higher position proceed as followsUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsGeneral advice Special adviceUse of 3 in 1 combi detergents Washing programmes ProgrammeSetting and starting the programme Setting and starting the programme with the delay startStarting a washing programme To interrupt or cancel a washing programme in progress To cancel a delay start in progressCancel a washing programme in progress End of the washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersNever try to remove the upper spray arm Frost precautions Prolonged periods of non-operationMoving the machine Flashing fault code appears Something not workingThere are problems when operating the dishwasher Dishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService Service and Spare Parts Customer Care Department08705 This guarantee does not cover Guarantee ConditionsStandard Guarantee Conditions ExclusionsEuropean Guarantee Technical specifications Electrical connectionBuilding-in LevellingFixing to the adjacent units Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hoseWater outlet hose connection Brown Live Electrical connectionGreen and Yellow Earth Blue Proceed as followsInstallation instructions Hints for test centres Page Postfach 90327 Nürnberg Copyright by AEG