Electrolux 65080 VIL manual Installation instructions

Page 49

Installation instructions

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

Warning!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

49

Image 49

Contents Favorit 65080 VIL Dear customer Following symbols are used in the textContents Installation Safety instructionsChild safety Your dishwasher in day-to-day use Economical and ecological dishwashing DisposalDescription of the appliance Digital display indicates Control panel1 function Indicator light off 1 function active Indicator light onActivation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Deactivation/activation of the audible signals Audible signalsFactory setting audible signals activated Water softener Prior to using for the first timeSetting electronically Setting manuallyExamples ExampleTo fill Filling with dishwasher saltFilling with rinse aid Rinse aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Daily useGlazed patterns may fade if machine washed frequently Lower basket Cutlery basket Upper basket Case that plates are loaded in the upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketFill with detergent Use of detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsSpecial advice General adviceUse of 3 in 1 combi detergents Programme Washing programmesSetting and starting the programme with the delay start Setting and starting the programmeStarting a washing programme To cancel a delay start in progress To interrupt or cancel a washing programme in progressCancel a washing programme in progress Unloading the dishwasher End of the washing programmeCleaning the filters Maintenance and cleaningNever try to remove the upper spray arm Prolonged periods of non-operation Frost precautionsMoving the machine Something not working Flashing fault code appearsThere are problems when operating the dishwasher Wash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesService Customer Care Department Service and Spare Parts08705 Standard Guarantee Conditions Guarantee ConditionsThis guarantee does not cover ExclusionsEuropean Guarantee Electrical connection Technical specificationsLevelling Building-inFixing to the adjacent units Water supply connections Please take care when installing the water inlet hose Water inlet hose with safety valveWater outlet hose connection Green and Yellow Earth Blue Electrical connectionBrown Live Proceed as followsInstallation instructions Hints for test centres Page Postfach 90327 Nürnberg Copyright by AEG