Electrolux 65080 VIL manual Water inlet hose with safety valve

Page 46

Installation instructions

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

-The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

-If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

-A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre.

-Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

46

Image 46

Contents Favorit 65080 VIL Following symbols are used in the text Dear customerContents Installation Safety instructionsChild safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashingDescription of the appliance Control panel Digital display indicates1 function Indicator light off 1 function active Indicator light onActivation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Deactivation/activation of the audible signals Audible signalsFactory setting audible signals activated Prior to using for the first time Water softenerSetting manually Setting electronicallyExample ExamplesFilling with dishwasher salt To fillFilling with rinse aid Rinse aidEnsure that the lid is closed after every refill Adjusting the dose Daily use Loading cutlery and dishesGlazed patterns may fade if machine washed frequently Lower basket Cutlery basket Upper basket Case that plates are loaded in the upper basket Adjusting the height of the upper basket To move to the higher position proceed as followsUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsSpecial advice General adviceUse of 3 in 1 combi detergents Washing programmes ProgrammeSetting and starting the programme with the delay start Setting and starting the programmeStarting a washing programme To cancel a delay start in progress To interrupt or cancel a washing programme in progressCancel a washing programme in progress End of the washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersNever try to remove the upper spray arm Prolonged periods of non-operation Frost precautionsMoving the machine Flashing fault code appears Something not workingThere are problems when operating the dishwasher Dishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService Customer Care Department Service and Spare Parts08705 This guarantee does not cover Guarantee ConditionsStandard Guarantee Conditions ExclusionsEuropean Guarantee Technical specifications Electrical connectionLevelling Building-inFixing to the adjacent units Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hoseWater outlet hose connection Brown Live Electrical connectionGreen and Yellow Earth Blue Proceed as followsInstallation instructions Hints for test centres Page Postfach 90327 Nürnberg Copyright by AEG