Electrolux 65080 VIL manual Hints for test centres

Page 50

Hints for test centres

Hints for test centres

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).

	Load:			12 standard place settings


	Rinse aid setting			Position 4 (type III)


	Detergent dosage:			5 g + 25 g (type B)

Arrangement upper basket	Arrangement lower basket
(take off the glass holder)

Cup racks: position A	Arrangement cutlery
	basket

50

Image 50

Contents Favorit 65080 VIL Following symbols are used in the text Dear customerContents Child safety Safety instructionsInstallation Your dishwasher in day-to-day use Disposal Economical and ecological dishwashingDescription of the appliance Control panel Digital display indicates1 function Activation/deactivation of the 3 in 1 function 1 function active Indicator light onIndicator light off Activation/deactivation of the rinse aid dispenser Factory setting audible signals activated Audible signalsDeactivation/activation of the audible signals Prior to using for the first time Water softenerSetting manually Setting electronicallyExample ExamplesFilling with dishwasher salt To fillEnsure that the lid is closed after every refill Rinse aidFilling with rinse aid Adjusting the dose Daily use Loading cutlery and dishesGlazed patterns may fade if machine washed frequently Lower basket Cutlery basket Upper basket Case that plates are loaded in the upper basket Adjusting the height of the upper basket To move to the higher position proceed as followsUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsUse of 3 in 1 combi detergents General adviceSpecial advice Washing programmes ProgrammeStarting a washing programme Setting and starting the programmeSetting and starting the programme with the delay start Cancel a washing programme in progress To interrupt or cancel a washing programme in progressTo cancel a delay start in progress End of the washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersNever try to remove the upper spray arm Moving the machine Frost precautionsProlonged periods of non-operation Flashing fault code appears Something not workingThere are problems when operating the dishwasher Dishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService 08705 Service and Spare PartsCustomer Care Department This guarantee does not cover Guarantee ConditionsStandard Guarantee Conditions ExclusionsEuropean Guarantee Technical specifications Electrical connectionFixing to the adjacent units Building-inLevelling Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hoseWater outlet hose connection Brown Live Electrical connectionGreen and Yellow Earth Blue Proceed as followsInstallation instructions Hints for test centres Page Postfach 90327 Nürnberg Copyright by AEG