Electrolux 65080 VIL manual Technical specifications, Electrical connection

Page 43

				Operating instructions

	Technical specifications

	Dimensions:		Width	59.6 cm
			Height	86.8 - 94.8 cm
			Max depth	55.5 cm
			Max depth with open door	119 cm


	Electrical connection:		Information on the electrical connection is given on the
	Voltage		rating plate on the inner edge of the dishwasher’s door.
	Overall power
	Fuse


	Water supply pressure:		Minimum	50 kPa (0.5 bar)
			Maximum	800 kPa (8 bar)


	Capacity:			12 place settings

This appliance complies with the following E.E.C. Directives:

-73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

43

Image 43

Contents Favorit 65080 VIL Dear customer Following symbols are used in the textContents Installation Safety instructionsChild safety Your dishwasher in day-to-day use Economical and ecological dishwashing DisposalDescription of the appliance Digital display indicates Control panel1 function Indicator light off 1 function active Indicator light onActivation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Deactivation/activation of the audible signals Audible signalsFactory setting audible signals activated Water softener Prior to using for the first timeSetting electronically Setting manuallyExamples ExampleTo fill Filling with dishwasher saltFilling with rinse aid Rinse aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Daily useGlazed patterns may fade if machine washed frequently Lower basket Cutlery basket Upper basket Case that plates are loaded in the upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketFill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentSpecial advice General adviceUse of 3 in 1 combi detergents Programme Washing programmesSetting and starting the programme with the delay start Setting and starting the programmeStarting a washing programme To cancel a delay start in progress To interrupt or cancel a washing programme in progressCancel a washing programme in progress Unloading the dishwasher End of the washing programmeCleaning the filters Maintenance and cleaningNever try to remove the upper spray arm Prolonged periods of non-operation Frost precautionsMoving the machine Something not working Flashing fault code appearsThere are problems when operating the dishwasher Water drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullService Customer Care Department Service and Spare Parts08705 Exclusions Guarantee ConditionsStandard Guarantee Conditions This guarantee does not coverEuropean Guarantee Electrical connection Technical specificationsLevelling Building-inFixing to the adjacent units Water supply connections Please take care when installing the water inlet hose Water inlet hose with safety valveWater outlet hose connection Proceed as follows Electrical connectionGreen and Yellow Earth Blue Brown LiveInstallation instructions Hints for test centres Page Postfach 90327 Nürnberg Copyright by AEG