A S T O R I A 3
LOCATION OF APPLIANCE
This appliance must not be installed in a
INSTALLATION
1.PARTS REQUIRED
The loose hotplate parts are packed in the polystyrene fitment on the top of the hotplate. The grill pan, grill pan handle, fixing screws and splashplate fixing screws can be found in the furniture pack which is located in the bottom compartment. The grill pan requires assembly before use (see Fig. 1).
2.GRILL ASSEMBLY
The two splashplate screws should be screwed into the back of the appliance about halfway in (see Fig. 1a). Engage the keyhole slots in the splashback behind the two screws taking care not to trap the H.T. wire (see Fig. 1b).
Tighten 6 of splashplate screws (see Fig.1c).
Connect the grill supply union at the back of the appliance and pull the grill H.T. lead through the opening in the splashplate and connect on to the spark generator.
Fig.1
Grill Pan Handle Assembly:
Assemble grill pan (see Fig.1) and secure two screws provided.
Fig.1a
Fig.1c
Fig.1b
33