Temperature warning
For the freezer section:
An alarm sounds and the TEMPERATURE indicator and red back light flash, as soon as the temperature in the freezer section rises above
If the temperature in the freezer section falls back below
1.You can turn off the alarm and the red back lighting using the RESET but- ton.
For 5 seconds the temperature display for the freezer section shows the warmest temperature that was reached in the freezer section during the temperature warning. After that the temperature display stops flashing and switches back to the current temperature in the freezer section. The TEM- PERATURE indicator continues to flash, as long as there is a temperature warning.
If there is an interruption to the power supply during an alarm, when the appliance is reconnected to the supply, it starts with an acoustic and visual alarm.
If the possibility of partial or complete thawing exists, you should check the quality of the foods.
A rise in temperature may be caused by:
–frequent door opening for long periods of time;
–loading with large quantities of warm foods;
–high ambient temperature;
–an error with the appliance.
Function Errors
If the appliance’s electronics recognise a technical problem that has to be remedied by the Customer Service Department, an alarm sounds and the SERVICE indicator appears back lit with a flashing red light.
The temperature display indicates:
–a square or a letter in the temperature display of the fridge for a fault in the fridge,
–a square or a letter in the temperature display of the freezer for a fault in the freezer.
1. Using the RESET button you can switch off the alarm and the flashing red light. The SERVICE indicator continues to be lit as long as there is an elec- trical malfunction.
15