IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always be followed, including the following:
1.READ ALL INSTRUCTIONS BEFORE USING.
2.To protect against the risk of electrical shock, do not put motor base of blender in water or other liquids.
3.Close supervision is necessary when any appliance is used by or near children.
4.Unplug from outlet when not in use, before putting on or taking off parts, and before clean- ing or removing contents from blender jar. Never put hands into the blender jar, or handle the blades with appliance plugged in.
5.Avoid contact with moving parts.
6.Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to nearest Cuisinart service facility for examination, repair, and/or mechanical or electri- cal adjustment.
7.The use of attachments, including canning or ordinary jars, not recommended or sold by Cuisinart may cause fire, electrical shock, or risk of injury to persons.
8.Do not use outdoors.
9.Do not let cord hang over edge of counter or table or touch hot surfaces.
10.Keep hands and utensils out of jar while blending, to reduce the risk of severe injury to persons or damage to blender itself. A rubber or plastic spatula may be used but must be used only when the blender is turned off.
11.When blender is on, and LED lights are illumi- nated or flashing, do not touch cutting assembly, interfere with blade movement, or remove blender jar cover. Accidentally touching a speed button may activate the blender.
12.BLADES ARE SHARP. HANDLE CAREFULLY.
13.To reduce the risk of injury, never place cutting assembly on base unless the blender jar is properly attached.
14.Always operate blender with the cover in place.
15.Never leave your blender unattended while it is running.
16.Twist removable blade assembly firmly to blender jar. Injury can result if moving blades accidentally become exposed.
17.Regarding your cord set: A longer cord has been provided so that you will have flexibility in positioning your Cuisinart ReMix6.0
The longer cord should be arranged so that it will not drape over the counter or tabletop, where
it can be pulled on by children or tripped over. Excess cord should be stored in the cord stor- age area at the back of the blender base to avoid injury caused by the longer cord.
18.Wash the blender jar, blade assembly, and cover before first use.
19.WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER- SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.
20.WARNING: FLASHING LIGHT INDICATES READY TO OPERATE. DO NOT TOUCH BLADES.
21.When blending hot liquids in blender jar, remove measured pour lid to allow steam to escape.
22.Do not operate your appliance in an appliance garage or under a wall cabinet. When storing in an appliance garage always unplug the unit from the electrical outlet. Not doing so could create a risk of fire, especially if the appliance touches the walls of the garage or the door touches the unit as it closes.
2