Viking Complete Guide to Removing and Adjusting Range Doors Without Injury

Page 26

Door Removal

WARNING

TO PREVENT

PERSONAL INJURY

Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers.

1

Open door completely. Place pin in pin hole.

Door Replacement and Adjustment

1

2

Reinstall door to range.

Open door completely.

 

Reinstall hinge trim.

2

3

Remove hinge trim screws

Close until pins stop door.

and hinge trim.

 

4

Care

Lift door up and out.

 

Product

 

3

4

Remove pins from hole in hinges.

Close door.

5

If the door needs to be adjusted, loosen hinge

Product

 

trim screws located in step 2. Adjust the screws

 

located between the door and kickplate

 

using a 5/32” hex head allen wrench. After

Care

adjustment, tighten hinge trim screws.

 

50

51

Image 26
Contents Viking Use & Care Manual Table of Contents CongratulationsRecognize Safety Symbols, Words, Labels Getting StartedTo Prevent Fire or Smoke Damage Child SafetyCooking Safety Case of FireSelf-Clean Oven Utensil SafetyCleaning Safety Heating ElementsAbout Your Appliance Electrical Shock HazardBefore Using Range OvenProduct Range FeaturesControls Oven Functions and Settings Surface Operation Char-Grill on applicable models Griddle/Simmer Plate Clean Up & CareChar-Grill Assembly Char-Grill OperationChar-Grill Disassembly for Cleaning Char-Grill Assembly Char-Grill Clean Up & CareGrill Cooking Chart BeefCooking Vessels Oven FeaturesUsing the Oven Rack PositionsConventional and Convection Cooking Pan Placement TipsSingle Rack Pan Multiple Rack Pan Placement Proofing BakingBaking Tips Baking Chart Convection Baking ChartProblems Cause Remedy Solving Baking ProblemsCommon Baking Problems/Remedies RoastingConventional Roasting Chart BeefConv BROIL* Convection Broil Convection Roasting ChartBroiling To Use Broil or Convection Broil Broiling TipsBroiling Instructions Rack Positions for BroilingConvection Defrost Broiling ChartConvection Dehydrate Cleaning and Maintenance Self-Clean Cycle Replacing Oven Lights To start the Self-Clean cycleTo stop the Self-Clean cycle Care Door Replacement and AdjustmentDoor Removal Problem Possible Cause and/or Remedy TroubleshootingService Information Warranty Five Year Limited Warranty on Burners