WATER CONNECTION
| REAROFUNIT | |
| GARDENHOSE | |
| FITTING | |
5/8" (.63 cm) I.D. DRAIN |
| |
TUBINGBARB |
| |
MAKE CERTAIN ALL HOSE | 5 1/2" (14.0 cm) | |
CLAMPS ARE SECURE | ||
| ||
| 2 1/8" (5.4 cm) |
COMPRESSIONFITTING
1/4" (.64 cm) TUBING FROM COLD WATER LINE
Water Supply
•This ice machine must be connected to a potable, active cold water supply line delivering water pressure at a minimum pressure of 20 psi and maximum of 120 psi.
•Water connection is made through a 1/4” (.64 cm) compression right angle garden hose fitting. Do not use any thread sealers. NOTE: The water line fitting supplied with your ice machine is to be used on a 1/4” (.64 cm) copper water supply line only. Do not attach a plastic supply line to your unit using this fitting.
Fitting valve
Rubber washer |
| Adapter |
|
|
|
1/4” (.64 cm) copper water supply line (supplied by customer)
Compression fitting
From water supply to ice machine
Compression nut 
•A water filter is recommended for this unit. A quality filter can remove particles as well as remove taste and odors from water. •Do not use a reverse osmosis water filtration system with the ice machine.
•Softened water is not recommended. This will produce mushy, cloudy ice cubes that will stick together.
•A water specialist can recommend proper water treatment.
•After installation of water line, turn on water and check for any leaks. Additional tightening may be needed. Do not use any type of thread sealer.
•Allow extra water line for easy removal of unit and to help prevent the water line from kinking.
10