AssemblyPAge headerand.....operation

8.To turn the mixer on switch the ON/ OFF switch to the ON position. The LCD shows "0" and the display is flashing. The flashing light indicates ready to operate. Avoid any contact with the beaters, dough hooks or moveable parts. Commence mixing by pressing the (+) speed button to the desired speed required. You will see the speed of the mixer on the LCD screen between the (+/-) speed buttons. Always begin mixing at a lower speed setting to prevent splattering. Increase to the speed suited to the mixing task. The speed setting can be adjusted during operation by pressing the (+) or (-) buttons. Use the mixing guide as

a reference.

9.To operate the motor base turn the dial to your desired setting. You can choose from OFF, LOW or HIGH.

10.Occasionally stop the mixer during operation and scrape any food mixture down the sides of the mixing bowl with a spatula.

11.When mixing is completed, press the (-) speed button until the LCD displays “0” and switch the ON/OFF button to the OFF position.

12.Unplug the power cord.

13.Press the TILT button and tilt motor head back on the mixer stand.

14.Remove the beaters/dough hooks by pressing the eject button on the front panel of the mixer head while grasping the shaft of the beaters.

NOTE

The beaters/dough hooks will be released automatically. DO NOT try to pull the beaters/dough hooks out of the sockets. Use a spatula to remove mixture from the beaters/dough hooks.

BEM600XL_IB_A12_FA.indd 14

21/06/12 10:25 AM