PAgessemblyheaderand.....operation
USING THE HAND MIXER
The hand mixer can be used on its own (not on the stand) for smaller quantities of ingredients or quick light tasks that need to be mixed. To use the hand mixer without the stand please follow the below instructions:
1.Press the TILT button and tilt motor head back on the mixer stand.
2.On the inner side of the stand is a mixer head release button. Press this to remove the mixer head from the stand.
3.Ensure that the ON/OFF switch is set in the off position.
4.Add ingredients to the mixing bowl supplied as listed in the recipe.
5.Insert the power cord into a 110/120V power outlet.
6.Insert the beaters or dough hooks into the mixer head.
NOTE
There is a square and round beater. Please ensure that the correct beater is inserted in the appropriate slot, there is a graphic on the mixer to indicate which beater goes in each slot. The round ended beater is inserted on the left hand side and the square ended beater is inserted on the right
hand side.
7.To turn the mixer on switch the ON/OFF switch to the ON position. The LCD shows O and the display is flashing. The flashing light indicates ready to operate. Avoid any contact with the beaters, dough hooks or moveable parts. Commence mixing by pressing the (+) speed button to the desired speed required. You will see the speed on the mixer on the LCD screen between the
8.Always begin mixing at a lower speed setting to prevent splattering. Increase to the speed suited to the mixing task. The speed setting can be adjusted during operation by pressing the (+) or
a reference.
15
BEM600XL_IB_A12_FA.indd 15 | 21/06/12 10:25 AM |