assembly and operation
OPERATING YOUR Handy
Stand Mixer™
BEFORE FIRST USE
Machine Preparation
Remove and discard all labeling and packaging materials attached to your mixer. Ensure that you have removed all parts and accessories before discarding the packaging.
Clean parts and accessories using warm water and a gentle dish washing liquid and rinse well.
Ensure that the stainless steel bowl, dough hooks and beaters are washed in warm soapy water.
NOTE
When first using your Breville Handy Stand Mixer™ you may notice an odor coming from the motor. This is normal and will dissipate with use.
ASSEMBLING The Handy
Stand Mixer™
1.Place the mixer on a level dry surface such as a bench top. Ensure that both the hand mixer (mixer head) and the bowl motor dial is in the off position.
2.Attach the mixer head to the mixer stand by aligning the two (2) pins in the top of the stand with the two (2) slots located in the base of the hand mixer. Allow the hand mixer to slot into place. You will hear a locking noise which indicates that the hand mixer is in place.
NOTE
Make sure that the hand mixer is securely attached to the stand before using.
11
BEM600XL_IB_A12_FA.indd 11 | 21/06/12 10:25 AM |